TOSHIBA SATELLITE PRO 4280ZDVD

Date: septembre 20th, 2013

Pour télécharger les drivers pour TOSHIBA SATELLITE PRO 4280ZDVD pour Windows, Non-OS, Windows XP, Windows ME, Windows 98, Windows 95, Windows 2000, Windows NT, Other, cliquez sur "Télécharger". Si vous avez besoin d'un drivers d'une autre version, envoyez une demande de driver. Si vous avez des questions sur ce driver, veuillez nous contacter via le formulaire de contact. Sur cette page, vous pouvez discuter notamment de l'installation, la désinstallation et la mise à jour du driver.

Modèle:
4280ZDVD
Editeur:
Toshiba
Type de périphérique:
Portables, netbooks / Satellite Pro
Licence:
Gratuit

Windows Non-OS

Windows

Type de fichier: BIOS
Version: 1.63.0.4C
Taille: 672.11 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 1.40 for Satellite Pro 4260/4280.

CHANGE HISTORY

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Type de fichier: BIOS
Version: 1.2.26
Taille: 672.58 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 1.60 for Satellite Pro 4260/4280.

CHANGE HISTORY

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.
Type de fichier: BIOS
Version: 2.1.45
Taille: 682.22 Kb
Système d'exploitation: Windows XP
This software will notify you when new software or driver upgrades are available.

Change points from the last released version (2.1.40):

  1. Fixed: Toshiba Service Station crashes causing the "Service Station has stopped working" error message.
  2. Added Chinese translations.
  3. Added code to downsize the TSS window when it is too large to fit in the display.

Installation Instructions

  1. Save this file to a convenient location such as the Windows Desktop
  2. Save all work in progress and close open applications.
  3. On the Windows Desktop, double-click the downloaded file to start the installation.
    1. If a User Account Control message is displayed, click Continue.
    2. Answer the displayed prompts to complete the installation.
    3. Restart the computer.

Type de fichier: BIOS
Version: 1.0.80.3
Taille: 686.78 Kb
Système d'exploitation: Windows XP
TOSHIBA Media Controller allows you to control your music, pictures, and videos by streaming content to any compatible device in your home.

Change Points

  1. Changes were made to improve the TOSHIBA Media Controller Digital Media Renderer (DMR) function. Version 1.0.80.3 has more logic for detecting correct/reasonable content for North American Toshiba REGZA TVs purchased in 2009, and later.

Install Instructions

  1. Save the file to the Windows Desktop.
  2. Save all work in progress and close open applications.
  3. On the Windows Desktop, double-click the downloaded file to start the installation.
  4. Click Start at the TOSHIBA Archive Extractor window.
  5. Click Yes if a User Account Control window is displayed.
  6. Click Continue to start the installer program.
  7. Click Next to start the installation, and Next again to finish.

Version Verification

  1. Open Control Panel, Programs and Features, then click Uninstall a program.
  2. Scroll down to TOSHIBA Media Controller.
  3. Verify that the version is 1.0.80.3.32.
Type de fichier: BIOS
Version: 2.1.33
Taille: 688.07 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 2.10 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Type de fichier: BIOS
Version: 2.1.51
Taille: 687.79 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 2.20 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Type de fichier: BIOS
Version: 2.3.0.13
Taille: 689.3 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 2.40 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Type de fichier: BIOS
Version: 1093.2.1217.2010
Taille: 688.98 Kb
Système d'exploitation: Windows XP
This is the driver for the Wireless LAN controller. This driver is needed for the device to function properly.

Changes From Previous Version

  1. Improved intermittent disconnects from Meru access points.

Installation Instructions

  1. Save this file to a convenient location such as the Windows Desktop.
  2. Save all work in progress and close open applications.
  3. Double-click the downloaded file icon.
  4. Answer the remaining prompts to complete the installation.
  5. Restart the computer.

Driver Version Verification

  1. Run Control Panel.
  2. Double-click System.
  3. Click the Hardware Tab.
  4. Click Device Manager.
  5. Double-click Network Adapters, then double-click Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC
  6. Select the Driver tab and verify that the driver version is V1093.2.1217.2010.

Type de fichier: BIOS
Version: 1.0.80.3
Taille: 689.42 Kb
Système d'exploitation: Windows XP
TOSHIBA Media Controller allows you to control your music, pictures, and videos by streaming content to any compatible device in your home.

Change Points

  1. Changes were made to improve the TOSHIBA Media Controller Digital Media Renderer (DMR) function. Version 1.0.80.3 has more logic for detecting correct/reasonable content for North American Toshiba REGZA TVs purchased in 2009, and later.

Install Instructions

  1. Save the file to the Windows Desktop.
  2. Save all work in progress and close open applications.
  3. On the Windows Desktop, double-click the downloaded file to start the installation.
  4. Click Start at the TOSHIBA Archive Extractor window.
  5. Click Yes if a User Account Control window is displayed.
  6. Click Continue to start the installer program.
  7. Click Next to start the installation, then Finish when completed.

Version Verification

  1. Open Control Panel, Programs and Features, then click Uninstall a program.
  2. Scroll down to TOSHIBA Media Controller.
  3. Verify that the version is 1.0.80.3.
Type de fichier: BIOS
Version: 3.8.32.1
Taille: 690.67 Kb
Système d'exploitation: Windows XP

CHANGE HISTORY

Version 2.70 ?07-26-2001

  • A change was made to correct a problem that some PC cards with a single spec for 16 bit and 3.3VDC may malfunction.
  • Corrected a problem of no LCD display after using Suspend/Resume.

Version 2.60 ?07-27-2000

  • Corrected an infrequent problem that slowed the speed of a system reboot, when the reset switch was used.
  • Corrected a problem when running Windows ME, that would cause the system to hang when suspending/resuming the computer after switching Step Speed.
  • Fixed an issue that caused one line on the right side of the display to not be seen, when the CRT setting was 1600x1200 at 75Hz.

Version 2.50 ?08-02-2000

  • Corrected a problem where the computer would not see the FDD when running under Windows 95, causing the computer to hang. This problem would only occur on computers manufactured with a PCB containing the Super I/O chip.

Version 2.40 ?07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20 ?06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10 ?06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.
Type de fichier: Applicazione
Version: 12.4.1.11.0
Taille: 310.42 Kb
Système d'exploitation: Windows 98
Toshiba Hibernation Patch version 1.0 for AOL 5.0.
Type de fichier: Applicazione
Version: 9.11.64
Taille: 7.92 Mb
Système d'exploitation: Windows ME, Windows 98, Windows 95, Windows 2000, Windows NT
Logitech MouseWarex, 2000.
Type de fichier: Driver
Version: 2.00.0005_090623
Taille: 1.58 Mb
Système d'exploitation: Windows NT
Windows NT Advanced Power Management Subsystem version 2.05.33.
This version is updated to eliminate a CPU speed change while playing sounds.

Notes:

  1. If the previous version is installed in the system, uninstall it and reboot the PC before installing the new one.
  2. When applying the WindowsNT Service Pack, fist uninstall Toshiba Power Management (TPM), apply Service Pack, then re-install TPM. Note that TPM was certified on SP3 & SP4 & SP5 & SP6 only, so there is no assurance that it will work with future versions of Service Pack.
  3. The capability to resume PC cards after resuming depends on the HotSwap function of CardWizard and HotSwappable drivers. This capability does not work without them.
  4. Suspend request will be rejected by CardWizard when a non-HotSwappable card or ATA with open handle are in use.
  5. The system will be put into instant security mode but not actual suspend mode, when it is docked with a docking station(DS) and expansion station(EXP) and media docker(MD). This is because the option cards and SCSI in DS and EXP and MD do not support TPM. Actual suspend will cause loss of network connection and incorrect action by the SCSI device.
  6. System Auto Off does not work if Auto Run is enabled. Auto Run causes periodic interrupt, due to accessing the CD-ROM, and it prevents detection of system idle. Some unknown software may prevent System Auto Off from functioning for the same reason, even if the system appears to be idle.
  7. Ring resume function is supported with the internal modem only. It does not work with PC card modems.
Type de fichier: Driver
Version: 13.2.6.1
Taille: 1.51 Mb
Système d'exploitation: Windows NT
Toshiba Windows NT Utilities version 1.00.10.
Type de fichier: Driver
Version: 1.1.11.0
Taille: 1.05 Mb
Système d'exploitation: Windows 2000
Windows 2000 Display Driver version 7.30.38-RC3 for S3 Savage MX/IX display adapter.
Type de fichier: Driver
Version: 8.15.10.1883
Taille: 71.63 Kb
Système d'exploitation: Windows XP
Type de fichier: Driver
Version: 1.00.2518
Taille: 1.02 Mb
Système d'exploitation: Windows XP
Mobile Extensions provide Docking support (warm-dock/undock, eject password, etc.) functionality. Requires Toshiba ACPI common modules (TVALD).
Type de fichier: Applicazione
Version: 3.02.02
Taille: 2.06 Mb
Système d'exploitation: Windows XP, Windows 2000
Toshiba Utilities provide the HWSetup application and the FnEsse task switcher application. Requires Toshiba ACPI Common Modules (TVALD).
Type de fichier: Driver
Version: 2.1.0.1
Taille: 1.57 Mb
Système d'exploitation: Windows NT
2.1.0.1 for x64
1.To install or uninstall this software, logon with Administrator user privilege.
2.How to install new version when an old one has been already installed in your system: 1Uninstall the old version from “Control Panel” and reboot the system. 2)Install the new version.
3.TOSHIBA Disc Creator uses Windows Media Player(WMP) to gather titles for the songs on the music CDs. When WMP is not installed or configured, the function which displays the music name of CD does not work.
Type de fichier: Driver
Version: 3.0.32.2
Taille: 769.65 Kb
Système d'exploitation: Windows NT
version: 3.0.32.2(MDRg3032205)This Utility sets telephony location based on DMI information in the computer.
Type de fichier: Driver
Version: 4.4
Taille: 1.27 Mb
Système d'exploitation: Windows XP
This software is the foundation for the other Toshiba-provided utilities and power management software, and must be installed prior to installing other Toshiba software. Some Toshiba applications may refer to this as TVALD (for Toshiba Value-Added Logic Device).
Type de fichier: Driver
Version: 3.2.11
Taille: 660.41 Kb
Système d'exploitation: Windows 2000
Windows 2000 Modem Driver version MR577ALL004 for 56k V.90 Internal Modems.
Type de fichier: Applicazione
Version: 12.4.0.21.1.x32_wCAT
Taille: 31.5 Kb
Système d'exploitation: Windows 98
Windows 98 PCMCIA.INF file version 1.0-RC2 for Satellite 2615/2655.
Type de fichier: Driver
Version: 12.4.1.11.0.s64_wCAT
Taille: 1.73 Mb
Système d'exploitation: Windows ME
Windows Me Display Driver version 7.13.26-01 for S3 Savage/IX display adapters.
Type de fichier: Applicazione
Version: 1.03
Taille: 277.63 Kb
Système d'exploitation: Windows 98, Windows 95
Windows 95/98 DVDFAST.VXD version 1.03 for Satellite 4090/4100. Improves suspend/resume time on DVD-equipped models.
Type de fichier: Driver
Version: 1.1.1.9
Taille: 341.88 Kb
Système d'exploitation: Windows 2000
Windows 2000 FDC Driver version 1.0-RC2.
Type de fichier: Driver
Version: 6.1.7100.30101
Taille: 4.79 Mb
Système d'exploitation: Windows 2000
Windows 2000 Sound Driver version 4.10.2224 for Yamaha DS-XG sound system.
Type de fichier: Applicazione
Version: 2.0.
Taille: 1.65 Mb
Système d'exploitation: Windows 98, Windows 95
Toshiba Software Upgrade version 2.0. This application automatically updates device drivers and BIOS as they become available from Toshiba.
Type de fichier: Applicazione
Version: 2.0.
Taille: 43.66 Kb
Système d'exploitation: Windows 98, Windows 95
Windows 95/98 Hibernation File Make Utility version 2.0.
Type de fichier: Driver
Version: V3.01.0.11-A
Taille: 863.16 Kb
Système d'exploitation: Windows NT
Toshiba Windows NT Docking Service version 3.0-RC2.
Type de fichier: Driver
Version: 8.0.0.97.1.x32_wCAT
Taille: 590.61 Kb
Système d'exploitation: Windows XP
Type de fichier: Driver
Version: 1.01
Taille: 1.28 Mb
Système d'exploitation: Windows 95
1. Ext. Screen orientation - Rotates the screen of your external monitor. This functionality is available if your computer is a tablet PC and when you have connected a external monitor to your computer.
2. Lock Computer - Locks the computer.
3. TOSHIBA Assist - Launches the TOSHIBA Assist if it exists.

Screen rotation should be performed when the Colors of a external monitor is Medium (16 bit). If the colors is Highest (32 bit), the screen will become black when the rotation is performed.
Type de fichier: Driver
Version: 1.45
Taille: 287.63 Kb
Système d'exploitation: Windows 98, Windows 95
Windows 98 NDIS driver version 1.45 for MSIR (Microsoft Infrared) 3.0.
Type de fichier: Applicazione
Version: 3.1.64.0
Taille: 276.64 Kb
Système d'exploitation: Windows 95
Windows 95 PCMCIA.INF file version 1.2.
Type de fichier: Driver
Version: 4.12.01.2015
Taille: 7.86 Mb
Système d'exploitation: Windows 98, Windows 95
Windows 95/98 Sound Driver version 4.12.01.2015 for Yamaha DS-XG sound system.
Type de fichier: Driver
Version: 8.634.1
Taille: 5.66 Mb
Système d'exploitation: Windows NT
Windows NT Sound driver version 4.00.1233 for Yamaha DS-XG sound system.
Type de fichier: Applicazione
Version: 7.02.65a-01
Taille: 1.44 Mb
Système d'exploitation: Windows 98, Windows 95
Windows 95/98 Display Driver version 7.02.65a-01 for S3 Savage/MX display adapter.
Type de fichier: Driver
Version: 5.10.0.5904
Taille: 1 Mb
Système d'exploitation: Windows NT
Windows NT Display Driver version 7.10.08 for S3 Savage/MX display adapters.
Type de fichier: Driver
Version: 1.2.25
Taille: 1.54 Mb
Système d'exploitation: Windows XP
Type de fichier: Driver
Version: 6.14.10.4953
Taille: 671.14 Kb
Système d'exploitation: Windows 95
Windows 95 Unimodem V Drivers version 4.10.1343.01-RC5 for Tecra 8000, Portege 7000.
Type de fichier: Driver
Version: 2.0USB1
Taille: 655 Kb
Système d'exploitation: Windows 98, Windows 95, Windows 2000, Windows NT
This driver exposes system information to DMI-enabled applications.
Type de fichier: Driver
Version: 1.63.0.7C
Taille: 1.02 Mb
Système d'exploitation: Windows 2000
This software is the foundation for the other Toshiba-provided Win2k Utilities, and must be installed first.
Type de fichier: Applicazione
Version: 2.2.9
Taille: 1.07 Mb
Système d'exploitation: Windows XP
This application enables your computer to periodically search for Toshiba Software updates or alerts from Toshiba that are specific to your laptop.

Change points:

  1. Fixed: System crashes after login.
  2. Improved package downloads by using the Binary Intelligent Transfer Service (BITS).
  3. Combined the Download and Install buttons.
  4. Added a Home Link to the Settings Page.
  5. Removed the Notification Level Setting.
  6. Deletes obsolete software - i.e. Software that was already downloaded and installed.
  7. Notification message improvements.

Installation Instructions

  1. Save this file to a convenient location such as the Windows Desktop
  2. Save all work in progress and close open applications.
  3. On the Windows Desktop, double-click the downloaded file to start the installation.
  4. Answer the displayed prompts to complete the installation.

Type de fichier: BIOS
Version: 2.1.77
Taille: 1.09 Kb
Système d'exploitation: Windows XP
version: 2.1.77(SM2177ALD06)
Type de fichier: Driver
Version: 1.40.40
Taille: 3.6 Mb
Système d'exploitation: Windows 95
Type de fichier: Driver
Version: 6.40.04(T)
Taille: 3.6 Mb
Système d'exploitation: Windows 98
Type de fichier: Driver
Version: 13.2.6.1
Taille: 723.91 Kb
Système d'exploitation: Windows NT
Type de fichier: Driver
Version: 7.00.10(T)
Taille: 1.35 Mb
Système d'exploitation: Windows 2000
Provides Toshiba-specific Win2k display (LCD) power management functionality. Requires Toshiba ACPI common modules (TVALD).

Version 1.0.0 contained code which controlled portions of the display adapter as well as the display panel. This version (1.1.0) controls only the display panel.

Type de fichier: Applicazione
Version: 1.00.04
Taille: 1.25 Mb
Système d'exploitation: Windows 2000
This software is the foundation for the other Toshiba-provided Win2k Utilities, and must be installed first.
Type de fichier: Driver
Version: 1.62.0.5C
Taille: 1.35 Mb
Système d'exploitation: Windows 2000
Toshiba Windows 2000 Power Extensions version 3.03.00. Power Extensions provide the Toshiba-specific Win2k power management functionality (power schemes, power button configuration, etc.). Requires Toshiba ACPI modules (TVALD).
Type de fichier: Driver
Version: 5.90.17
Taille: 1.09 Mb
Système d'exploitation: Windows ME
Toshiba Hibernation Utility version 5.1
Type de fichier: Driver
Version: 5.708.1030.2008
Taille: 1.41 Mb
Système d'exploitation: Windows ME
Toshiba Power Saver Utility version 4.00.00
Type de fichier: Driver
Version: 1.0
Taille: 48.84 Kb
Système d'exploitation: Windows 2000
Toshiba Windows 2000 Infrared Port Driver version 2.21.
Type de fichier: Driver
Version: 1.62.0.9C
Taille: 4.99 Mb
Système d'exploitation: Windows ME
Windows Me Sound Driver version 5.12.01.2229 for Yamaha DS-XG sound system.
Type de fichier: Driver
Version: 1.2.26_64
Taille: 1.5 Mb
Système d'exploitation: Windows 2000
Windows Utilities provide the FnEsse and HWSetup applications.
Type de fichier: Driver
Version: 1.1.1.6
Taille: 2.07 Mb
Système d'exploitation: Windows 98
Toshiba Windows 98 Utilities version W984340USB3 for Satellite Pro 4260/4280.
Type de fichier: Driver
Version: 1.1.1.4
Taille: 1.91 Mb
Système d'exploitation: Windows 95
Toshiba Windows 95 Utilities version W954340USB2 for Satellite Pro 4260/4280.

Non-OS

Type de fichier: BIOS
Version: 1.40
Taille: 672.11 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 1.60
Taille: 672.58 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 1.80
Taille: 682.22 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.00
Taille: 686.78 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.10
Taille: 688.07 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.20
Taille: 687.79 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.40
Taille: 689.3 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.50
Taille: 688.98 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.70
Taille: 690.67 Kb
Système d'exploitation: Other
Type de fichier: Applicazione
Version: 1.0 build 60303
Taille: 1.07 Mb
Système d'exploitation: Other
Type de fichier: BIOS
Taille: 1.09 Kb
Système d'exploitation: Other


Connexe

TOSHIBA SATELLITE PRO 4280XDVD
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO 4280XDVD (Other)

TOSHIBA SATELLITE PRO L450-EZ1522
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO L450-EZ1522 (Other)

TOSHIBA SATELLITE PRO 4300
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO 4300 (Other)

TOSHIBA SATELLITE PRO 410CDT
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO 410CDT (Other)

TOSHIBA SATELLITE PRO L550-EZ1703
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO L550-EZ1703 (Other)

TOSHIBA SATELLITE PRO 400CDT
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO 400CDT (Other)


Demande de driver

ejemplo