TOSHIBA SATELLITE U940-SP4362SM

This is an Intel Management Engine Interface update.

Changes in this update

1. Fixes a security weakness of Windows Services on Intel(R) 7 Series chipset (ChiefRiver) integrated PCs.

Installation Instructions

1. Download and save this file to a convenient location such as the Windows Desktop.
2. Save all work in progress and close open applications.
3. Double-click the downloaded file OS2015054A_TC00604900C.exe to start the installation.
4. Press the Start button at the Toshiba Archive Extractor window.
5. Press Yes if a User Account Control message is displayed.

For silent installs

1. Run the application with the "/s" option.
2. ex. OS2015054A_TC00604900C.exe /s.

Driver Version Verification

1. From Programs and Features in Control Panel
2. Find Intel(R) Management Engine Components
3. Verify that the version is 9.5.23.1766

1. Open Device Manager in Control Panel
2. Double-click Intel(R) Management Engine interface in the System devices group
3. From the Driver tab:
4. Verify that the version is 9.5.24.1790

Release Notes

• For CD-ROM BIOS updates - Windows 8 models: (1) Shut down the system while pressing the SHIFT key to completely power off. (2) Power on while pressing F2 to enter the BIOS Setup Menu. (3) Go to the Security tab and set the "Secure Boot" setting to "Disabled". (4) Go to the Advanced tab, enter "System Configuration" and set the Boot Mode to "CSM Boot." (5) Press F10 to save and exit. (6) Boot from the BIOS CD-ROM and type BIOS at the C:\\ prompt. (7) After the BIOS update has completed, restore the Boot Mode setting to "UEFI Boot" and the Secure Boot setting to Enabled.
• For CD-ROM BIOS updates - Windows 7 computers: Boot from the BIOS CD-ROM, type BIOS, then press enter at the C:\\ prompt.
• For all updates: The BIOS update will force the computer to shut down or restart. Please make sure to save all work in progress before starting BIOS updates.
• Power on the computer if it is off.
• While the "TOSHIBA" logo is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
• Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

• Version 1.20 - 2012-09-11
  • Initial production BIOS for these models.

Release Notes

• For CD-ROM BIOS updates - Windows 8 models: (1) Shut down the system while pressing the SHIFT key to completely power off. (2) Power on while pressing F2 to enter the BIOS Setup Menu. (3) Go to the Security tab and set the "Secure Boot" setting to "Disabled". (4) Go to the Advanced tab, enter "System Configuration" and set the Boot Mode to "CSM Boot." (5) Press F10 to save and exit. (6) Boot from the BIOS CD-ROM and type BIOS at the C:\\ prompt. (7) After the BIOS update has completed, restore the Boot Mode setting to "UEFI Boot" and the Secure Boot setting to Enabled.
• For CD-ROM BIOS updates - Windows 7 computers: Boot from the BIOS CD-ROM, type BIOS, then press enter at the C:\\ prompt.
• For all updates: The BIOS update will force the computer to shut down or restart. Please make sure to save all work in progress before starting BIOS updates.
• Power on the computer if it is off.
• While the "TOSHIBA" logo is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
• Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

• Version 1.30 - 2012-12-19
  • Fixed: No external CRT display in CSM boot mode when the computer is started with the LCD panel closed.
  Version 1.20 - 2012-09-11
  • Initial production BIOS for these models.

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Service Station Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file TC00398200D.exe to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Toshiba Service Station 2.1.14 is applied successfully, the message below will be shown.

SERVICE STATION

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

To open Service Station:

1. Click the Start menu.
2. Enter "Service Station" into the search field.
3. Click "Service Station" in the search results.
4. Service Station will open.

To enable / disable Service Station:

1. Click the "View Program Access Information" link located under "Last Update" in the lower Left corner.
2. Toshiba Service Station Access Information window will open.
3. To disable this application (not recommended) click the disable button. To continue using this application click the enable button.

This is a Bluetooth Stack for Windows by Toshiba update

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Bluetooth Stack Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file TC00636200a.exe to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Bluetooth Stack for Windows by Toshiba v9.10.32(T) is applied successfully, the message below will be shown. Click Yes to restart the system.

PC HEALTH MONITOR

The TOSHIBA PC Health Monitor proactively monitors a number of system functions such as power consumption, battery health and system cooling, informing you of significant system conditions.

To open HDD Protection properties to allow enabling / disabling (not recommended):

1. Click the Start menu.
2. Enter "Health" into the search field.
3. Click "PC Health Monitor" in the search results.
4. TOSHIBA PC Health Monitor will open displaying overall health of your computer.
   
5. Clicking on the images will open a new window displaying status of for that function. Clicking on "Hard Disk Drive 3D Sensor" will open the HDD Protection properties described above.

CLICK HERE and refer to your Owner's Manual for additional information for the PC Health Monitor.

RESOLUTION

TOSHIBA Resolution is a Plug-in

ECO UTILITY

Some laptops are equipped with "eco mode". This mode slightly lowers performance of some devices to reduce electric power consumption. You can realize measurable power savings by using it continuously. TOSHIBA eco Utility helps you monitor your power savings by showing approximate real time power consumption. Furthermore, it shows approximate accumulated power consumption and approximate accumulated power savings when using eco mode daily, weekly, and monthly. The utility also shows the approximate accumulated CO2 emission and savings while using eco mode. You can  track power savings by using eco mode continuously.

eco Mode sets the conditions described below. If you deviate from these settings, e.g., if you turn up the monitor brightness or turn on the LED illumination (*1), it will no longer be eco mode.

eco power plan is used for eco Mode. It has the following settings by default. These settings are in addition to the standard Power saver plan settings of Windows.

On AC adaptor plugged in:

It changes the display brightness to Level-4, changes the dimmed display brightness to Level-1 (*4), turns off the LED illumination (*1) and the keyboard backlight (*2), changes the time before dim the monitor to 2 minute (*4), changes the time before the monitor turns off to 5 minutes, changes the time before the hard disk turns off to 5 minutes, and changes the time before the system enters sleep to 10 minutes.

On Battery:

It changes the display brightness to Level-3, changes the dimmed display brightness to Level-1 (*4), turns off the LED illumination (*1) and the keyboard backlight (*2), changes the time before dim the monitor to 1 minute (*4), changes the time before the monitor turns off to 3 minutes (2 minutes, if models with Windows 7 installed), changes the time before the hard disk d

PC HEALTH MONITOR

The TOSHIBA PC Health Monitor proactively monitors a number of system functions such as power consumption, battery health and system cooling, informing you of significant system conditions.

To open HDD Protection properties to allow enabling / disabling (not recommended):

1. Click the Start menu.
2. Enter "Health" into the search field.
3. Click "PC Health Monitor" in the search results.
4. TOSHIBA PC Health Monitor will open displaying overall health of your computer.
   
5. Clicking on the images will open a new window displaying status of for that function. Clicking on "Hard Disk Drive 3D Sensor" will open the HDD Protection properties described above.

CLICK HERE and refer to your Owner's Manual for additional information for the PC Health Monitor.

PASSWORD UTILITY

This utility adds additional password security to your Toshiba computer. After registering a user password, you will be required to input it when booting the computer or starting the Password Utility. Refer to your Owner's Manual for complete details.

To open the Password Utility:

1. Click the Start menu.
2. Enter "Password" into the search field.
3. Click "Password Utility" in the search results.
4. The Password Utility will open allowing you to set, delete or change the password.

• Set password will regsiter a user password with the computer.
• Delete allows you to delete the regsitered user password.
• Change allows you to change the regsitered user password.

When setting a password, you can apply it to the HDD. For information about this feature, click on "Learn More...".

FLASH CARDS

TOSHIBA Flash Cards is a utility using a card type design. It replaces the "Hot Key Utility" which is a conventional utility for Windows. Pressing a specific key together with the Fn key executes the function assigned to the key (hot key function). When a hot key is pressed or the mouse cursor is moved to the end of the screen, the cards are displayed in a row at the end of the screen.

When a key to which a hot key was assigned is pressed or when one of the cards lined up at the end of the screen is selected, the card is displayed. The functions that the user can select from this card are presented with the subitems displayed with the card. When the user selects a subitem, the function of the selected item is executed. A hot key or mouse can be used to select an item when it is displayed.

Selecting an item using the keyboard

While pressing down the Fn key, press the hot key repeatedly to move along the subitems that can be selected. The function of the subitem that is selected when the user releases the Fn key is executed.

• When [F6/F7] is pressed, only selecting a subitem without releasing the Fn key executes the corresponding function.

Selecting an item with the mouse

Moving the mouse cursor can move along the subitems that can be selected. The function of the subitem that is selected when the left mouse button is clicked.

• When [F6/F7] is pressed, moving the slider executes the function.

To open the Flash Cards utility settings:

1. Click the Start menu.
2. Enter "Flash" into the search field.
3. Click "Flash Cards" in the search results.
4. Setting for Flash Cards will open.