Type de fichier: Driver Version: 3.0.1.208 Taille: 273.99 Mb Système d'exploitation: Windows XP |
Type de fichier: Applicazione Version: 10.0.6.110 Taille: 82.34 Mb Système d'exploitation: Windows 7 (64)
This is a WinDVD BD for Toshiba update.
Notes
- Requires a Blu-ray drive to play Blu-ray Discs.
Change Points
- Fixes abnormal Blu-ray Disc playback of certain titles.
Install Instructions
- Save the downloaded file to the Windows Desktop.
-
Save all work in progress and close open
applications.
- On the Windows Desktop, double-click the downloaded file to
start the installation.
- Click Start when the Toshiba Archive Extractor
window is displayed.
- Click Yes to continue if a User Account Control
window is displayed.
- Click OK after the update completes.
-
Reboot the computer.
Version Verification
- Click Start type Add or Remove Programs then
press Enter.
- Verify the that the Corel WinDVD version is
10.0.6.110. The Version column is to the extreme
right of the window.
|
Type de fichier: Applicazione Version: 3.2.3.1157 Taille: 44.11 Mb Système d'exploitation: Windows XP
This application enables computer/web site login using
fingerprint biometric input, on applicable Toshiba computers
configured with fingerprint sensors.
Notes
- Depending on the operating system on your computer, version
2.0.0.3209 (32-bit) or 2.0.0.6409 (64-bit) will be installed.
- User needs to register fingerprints again after upgrading
to this new version
- User cannot import user data that was exported by Toshiba
Finger Print Utility (TFPU) V1.x
- User cannot register fingerprints on the Winlogon desktop
Change Points
- Enroll screens changed based on the Windows Biometric
Framework (WBF) SDK
- Logon by Fingerprint UI changed
- Added support for automatic password input in IE9, Firefox
4-9 and Chrome 12-18
- Modified: File encryption/decryption
- Modified: Fingerprint data import/export
- Setting UI changed based on WBF/Vendor SDKs
- Supported Operating System (OS): Windows 7 only
- Supported Sensor: AuthenTec AT9 series chipsets
Update Instructions
- Save the file to a convenient location such as the Windows
Desktop.
-
Save all work in progress and close open
applications.
- On the Windows Desktop, double-click the downloaded file to
start the installation.
- Click Start at the TOSHIBA Archive Extractor window.
- Click Yes if a User Account Control message is
displayed.
- Follow the displayed instructions to complete the install.
- Restart the computer after the update completes.
|
Type de fichier: Applicazione Version: 2.1.0.13 Taille: 30.9 Mb Système d'exploitation: Windows 7 (32)
This is a Toshiba Disc Creator update for SCCM installations.
Change Points
- Fixed a filter driver installation issue with SCCM that
caused a yellow bang in device manager.
Install Instructions
- Save the downloaded file to the Windows Desktop.
-
Save all work in progress and close open
applications.
- On the Windows Desktop, double-click the downloaded file to
start the installation.
- Click Start when the TOSHIBA Archive Extractor
window is displayed.
- Click Yes to continue if a User Account Control
window is displayed.
- Follow the displayed instructions to complete the
installation.
|
Type de fichier: Applicazione Version: 2.1.0.13 Taille: 18.91 Mb Système d'exploitation: Windows 7 (64)
This is a Toshiba Disc Creator update for SCCM installations.
Change Points
- Fixed a filter driver installation issue with SCCM that
caused a yellow bang in device manager.
Install Instructions
- Save the downloaded file to the Windows Desktop.
-
Save all work in progress and close open
applications.
- On the Windows Desktop, double-click the downloaded file to
start the installation.
- Click Start when the TOSHIBA Archive Extractor
window is displayed.
- Click Yes to continue if a User Account Control
window is displayed.
- Follow the displayed instructions to complete the
installation.
|
Type de fichier: BIOS Version: 2.10 Taille: 5.39 Mb Système d'exploitation: Windows XP
Change History
-
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 2.30 Taille: 5.4 Mb Système d'exploitation: Windows XP
Change History
-
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 2.40 Taille: 5.4 Mb Système d'exploitation: Windows XP
Change History
-
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 2.60 Taille: 5.42 Mb Système d'exploitation: Windows XP
Change History
-
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 2.70 Taille: 5.42 Mb Système d'exploitation: Windows XP
Change History
-
Version 2.70 - 2011-06-08
- Added support for the HD (1600x900) panels on Tecra
models.
- Implemented the Intel processor specification to
improve stability.
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 2.80 Taille: 5.41 Mb Système d'exploitation: Windows XP
Change History
-
Version 2.80 - 2011-06-30
- Added support for the Samsung VRAM 1GBit G-die.
- Implemented the INTEL specification for the Intel 6
Series Chipset (Cougar Point) to improve stability.
Version 2.70 - 2011-06-08
- Added support for the HD (1600x900) panels on Tecra
models.
- Implemented the Intel processor specification to
improve stability.
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 3.00 Taille: 5.56 Mb Système d'exploitation: Windows XP
Change History
-
Version 3.00 - 2011-08-11
- Improved thermal control.
- Improved Hot Undock control in Windows XP.
- Improved a power-off issue.
- Improved an issue where the screen may flicker until
the OS starts while resuming from hibernation on external
GPU models.
- Improved stability when resuming from hibernation on
external GPU models.
Version 2.80 - 2011-06-30
- Added support for the VRAM Samsung 1GBit G-die.
- Implemented the INTEL specification for the Intel 6
Series Chipset (Cougar Point) to improve stability.
Version 2.70 - 2011-06-08
- Added support for the HD (1600x900) panels on Tecra
models.
- Implemented the Intel processor specification to
improve stability.
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 3.10 Taille: 5.56 Mb Système d'exploitation: Windows XP
Change History
-
Version 3.10 - 2011-09-02
- Implemented the INTEL specification for the Sandy
Bridge Processor to improve stability.
- Implemented a Linux PXE server local boot processing
improvement.
- Fixed: Screen flickers momentarily when connecting a
DisplayPort monitor with the docker. Updated the AMD
Seymour VGA BIOS on applicable models.
Version 3.00 - 2011-08-11
- Improved thermal control.
- Improved Hot Undock control in Windows XP.
- Improved a power-off issue.
- Improved an issue where the screen may flicker until
the OS starts while resuming from hibernation on external
GPU models.
- Improved stability when resuming from hibernation on
external GPU models.
Version 2.80 - 2011-06-30
- Added support for the VRAM Samsung 1GBit G-die.
- Implemented the INTEL specification for the Intel 6
Series Chipset (Cougar Point) to improve stability.
Version 2.70 - 2011-06-08
- Added support for the HD (1600x900) panels on Tecra
models.
- Implemented the Intel processor specification to
improve stability.
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 3.40 Taille: 5.57 Mb Système d'exploitation: Windows XP
Change History
-
Version 3.40 - 2011-11-22
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.40,
downgrading to earlier versions will not be possible.)
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a countermeasure for an issue where the
BIOS password cannot be entered on a USB Keyboard when the
USB Keyboard and Wireless USB Mouse are connected and the
system is docked.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Boot up LOGO screen for Japan models.
- Fixed: If the computer is undocked while shifting to a
sleep (Sx) state then re-docked, the computer cannot detect
the docker when powered back on.
Version 3.10 - 2011-09-02
- Implemented the INTEL specification for the Sandy
Bridge Processor to improve stability.
- Implemented a Linux PXE server local boot processing
improvement.
- Fixed: Screen flickers momentarily when connecting a
DisplayPort monitor with the docker. Updated the AMD
Seymour VGA BIOS on applicable models.
Version 3.00 - 2011-08-11
- Improved thermal control.
- Improved Hot Undock control in Windows XP.
- Improved a power-off issue.
- Improved an issue where the screen may flicker until
the OS starts while resuming from hibernation on external
GPU models.
- Improved stability when resuming from hibernation on
external GPU models.
Version 2.80 - 2011-06-30
- Added support for the VRAM Samsung 1GBit G-die.
- Implemented the INTEL specification for the Intel 6
Series Chipset (Cougar Point) to improve stability.
Version 2.70 - 2011-06-08
- Added support for the HD (1600x900) panels on Tecra
models.
- Implemented the Intel processor specification to
improve stability.
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 3.50 Taille: 5.57 Mb Système d'exploitation: Windows XP
Change History
-
Version 3.50 - 2012-01-11
- Improved the "eco Utility" power consumption accuracy.
- Fixed: TPM in the BIOS Setup menu is not restricted
using User Policy.
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.30,
downgrading to earlier versions will not be possible.)
- Improved the BitLocker function - a BitLocker message
was displayed after resuming from Hibernation.
- Implemented a fix for an issue where the BIOS password
cannot be entered when configured as follows: 1. Wired USB
keyboard is connected to the port replicator. 2. Wireless
USB mouse is connected to a computer USB port. 3. Computer
is docked to the port replicator.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Local Boot processing from Linux PXE servers.
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a fix for an issue where the BIOS password
can't be entered with some USB keyboards.
- Fixed: If the computer is undocked from the port
replicator while transitioning to a sleep (Sx) state then
re-docked, the computer cannot detect the port replicator
after it is powered on.
Version 3.40 - 2011-11-22
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.40,
downgrading to earlier versions will not be possible.)
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a countermeasure for an issue where the
BIOS password cannot be entered on a USB Keyboard when the
USB Keyboard and Wireless USB Mouse are connected and the
system is docked.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Boot up LOGO screen for Japan models.
- Fixed: If the computer is undocked while shifting to a
sleep (Sx) state then re-docked, the computer cannot detect
the docker when powered back on.
Version 3.10 - 2011-09-02
- Implemented the INTEL specification for the Sandy
Bridge Processor to improve stability.
- Implemented a Linux PXE server local boot processing
improvement.
- Fixed: Screen flickers momentarily when connecting a
DisplayPort monitor with the docker. Updated the AMD
Seymour VGA BIOS on applicable models.
Version 3.00 - 2011-08-11
- Improved thermal control.
- Improved Hot Undock control in Windows XP.
- Improved a power-off issue.
- Improved an issue where the screen may flicker until
the OS starts while resuming from hibernation on external
GPU models.
- Improved stability when resuming from hibernation on
external GPU models.
Version 2.80 - 2011-06-30
- Added support for the VRAM Samsung 1GBit G-die.
- Implemented the INTEL specification for the Intel 6
Series Chipset (Cougar Point) to improve stability.
Version 2.70 - 2011-06-08
- Added support for the HD (1600x900) panels on Tecra
models.
- Implemented the Intel processor specification to
improve stability.
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 3.60 Taille: 5.59 Mb Système d'exploitation: Windows XP
Change History
-
Version 3.60 - 2012-02-09
- Added support for Brazilian keyboards.
- Added support for Celeron processors.
- Added support for Core i3 QM67 models.
- Improved: Power consumption accuracy of the "Toshiba
eco Utility."
- Improved: Serial communication of PC Card models.
- Implemented a fix for an issue where the BIOS password
cannot be entered with some USB keyboards.
- Implemented the Intel specification for Intel Internal
Graphics with 4Gbit Memory to improve stability.
- Added support for models configured without a Wireless
LAN module.
- Improved the Intel Rapid Start Technology of SSD
models: Resume takes a long time on SSD Internal ODD
models.
- Added: Countermeasure for an issue where the CPU usage
rate will be 30%-50% when resuming from Hibernation when a
USB mouse is connected to a USB 3.0 port.
- EC/KBC V1.20: Fixed a phenomenon where an AC Adapter
check error may occur after using the T&D to perform an
EC/KBC update.
- Note: Portege Z930/R930 and Tecra R940/R950 models
share a common BIOS from BIOS V2.10 and EC/KBC V1.20.
Version 3.50 - 2012-01-11
- Improved the "eco Utility" power consumption accuracy.
- Fixed: TPM in the BIOS Setup menu is not restricted
using User Policy.
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.30,
downgrading to earlier versions will not be possible.)
- Improved the BitLocker function - a BitLocker message
was displayed after resuming from Hibernation.
- Implemented a fix for an issue where the BIOS password
cannot be entered when configured as follows: 1. Wired USB
keyboard is connected to the port replicator. 2. Wireless
USB mouse is connected to a computer USB port. 3. Computer
is docked to the port replicator.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Local Boot processing from Linux PXE servers.
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a fix for an issue where the BIOS password
can't be entered with some USB keyboards.
- Fixed: If the computer is undocked from the port
replicator while transitioning to a sleep (Sx) state then
re-docked, the computer cannot detect the port replicator
after it is powered on.
Version 3.40 - 2011-11-22
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.40,
downgrading to earlier versions will not be possible.)
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a countermeasure for an issue where the
BIOS password cannot be entered on a USB Keyboard when the
USB Keyboard and Wireless USB Mouse are connected and the
system is docked.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Boot up LOGO screen for Japan models.
- Fixed: If the computer is undocked while shifting to a
sleep (Sx) state then re-docked, the computer cannot detect
the docker when powered back on.
Version 3.10 - 2011-09-02
- Implemented the INTEL specification for the Sandy
Bridge Processor to improve stability.
- Implemented a Linux PXE server local boot processing
improvement.
- Fixed: Screen flickers momentarily when connecting a
DisplayPort monitor with the docker. Updated the AMD
Seymour VGA BIOS on applicable models.
Version 3.00 - 2011-08-11
- Improved thermal control.
- Improved Hot Undock control in Windows XP.
- Improved a power-off issue.
- Improved an issue where the screen may flicker until
the OS starts while resuming from hibernation on external
GPU models.
- Improved stability when resuming from hibernation on
external GPU models.
Version 2.80 - 2011-06-30
- Added support for the VRAM Samsung 1GBit G-die.
- Implemented the INTEL specification for the Intel 6
Series Chipset (Cougar Point) to improve stability.
Version 2.70 - 2011-06-08
- Added support for the HD (1600x900) panels on Tecra
models.
- Implemented the Intel processor specification to
improve stability.
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 3.80 Taille: 5.46 Mb Système d'exploitation: Windows XP
Change History
-
Version 3.80 - 2012-07-09
- Improved memory initialization.
Version 3.70 - 2012-05-15
- Added: Internal USB3.0 Controller Mode in the BIOS
Setup Menu.
- EC/KBC V1.50: Improved the battery charge function.
(Note: After updating to EC/KBC V1.50, downgrading will not
be possible.)
- Note: BIOS V3.70 is ONLY for the Portege R830/R835
models.
Version 3.60 - 2012-02-09
- Added support for Brazilian keyboards.
- Added support for Celeron processors.
- Added support for Core i3 QM67 models.
- Improved: Power consumption accuracy of the "Toshiba
eco Utility."
- Improved: Serial communication of PC Card models.
- Implemented a fix for an issue where the BIOS password
cannot be entered with some USB keyboards.
- Implemented the Intel specification for Intel Internal
Graphics with 4Gbit Memory to improve stability.
- Added support for models configured without a Wireless
LAN module.
- Improved the Intel Rapid Start Technology of SSD
models: Resume takes a long time on SSD Internal ODD
models.
- Added: Countermeasure for an issue where the CPU usage
rate will be 30%-50% when resuming from Hibernation when a
USB mouse is connected to a USB 3.0 port.
- EC/KBC V1.20: Fixed a phenomenon where an AC Adapter
check error may occur after using the T&D to perform an
EC/KBC update.
- Note: Portege Z930/R930 and Tecra R940/R950 models
share a common BIOS from BIOS V2.10 and EC/KBC V1.20.
Version 3.50 - 2012-01-11
- Improved the "eco Utility" power consumption accuracy.
- Fixed: TPM in the BIOS Setup menu is not restricted
using User Policy.
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.30,
downgrading to earlier versions will not be possible.)
- Improved the BitLocker function - a BitLocker message
was displayed after resuming from Hibernation.
- Implemented a fix for an issue where the BIOS password
cannot be entered when configured as follows: 1. Wired USB
keyboard is connected to the port replicator. 2. Wireless
USB mouse is connected to a computer USB port. 3. Computer
is docked to the port replicator.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Local Boot processing from Linux PXE servers.
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a fix for an issue where the BIOS password
can't be entered with some USB keyboards.
- Fixed: If the computer is undocked from the port
replicator while transitioning to a sleep (Sx) state then
re-docked, the computer cannot detect the port replicator
after it is powered on.
Version 3.40 - 2011-11-22
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.40,
downgrading to earlier versions will not be possible.)
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a countermeasure for an issue where the
BIOS password cannot be entered on a USB Keyboard when the
USB Keyboard and Wireless USB Mouse are connected and the
system is docked.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Boot up LOGO screen for Japan models.
- Fixed: If the computer is undocked while shifting to a
sleep (Sx) state then re-docked, the computer cannot detect
the docker when powered back on.
Version 3.10 - 2011-09-02
- Implemented the INTEL specification for the Sandy
Bridge Processor to improve stability.
- Implemented a Linux PXE server local boot processing
improvement.
- Fixed: Screen flickers momentarily when connecting a
DisplayPort monitor with the docker. Updated the AMD
Seymour VGA BIOS on applicable models.
Version 3.00 - 2011-08-11
- Improved thermal control.
- Improved Hot Undock control in Windows XP.
- Improved a power-off issue.
- Improved an issue where the screen may flicker until
the OS starts while resuming from hibernation on external
GPU models.
- Improved stability when resuming from hibernation on
external GPU models.
Version 2.80 - 2011-06-30
- Added support for the VRAM Samsung 1GBit G-die.
- Implemented the INTEL specification for the Intel 6
Series Chipset (Cougar Point) to improve stability.
Version 2.70 - 2011-06-08
- Added support for the HD (1600x900) panels on Tecra
models.
- Implemented the Intel processor specification to
improve stability.
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 3.90 Taille: 5.61 Mb Système d'exploitation: Windows XP
Change History
-
Version 3.90 - 2012-08-17
- Updated: MEBx to V7.0.0.0063.
- Fixed: Hangs at the Toshiba Logo when connected to a
specific express card.
- Implemented a CD Boot improvement.
Version 3.80 - 2012-07-09
- Improved memory initialization.
Version 3.70 - 2012-05-15
- Added: Internal USB3.0 Controller Mode in the BIOS
Setup Menu.
- EC/KBC V1.50: Improved the battery charge function.
(Note: After updating to EC/KBC V1.50, downgrading will not
be possible.)
- Note: BIOS V3.70 is ONLY for the Portege R830/R835
models.
Version 3.60 - 2012-02-09
- Added support for Brazilian keyboards.
- Added support for Celeron processors.
- Added support for Core i3 QM67 models.
- Improved: Power consumption accuracy of the "Toshiba
eco Utility."
- Improved: Serial communication of PC Card models.
- Implemented a fix for an issue where the BIOS password
cannot be entered with some USB keyboards.
- Implemented the Intel specification for Intel Internal
Graphics with 4Gbit Memory to improve stability.
- Added support for models configured without a Wireless
LAN module.
- Improved the Intel Rapid Start Technology of SSD
models: Resume takes a long time on SSD Internal ODD
models.
- Added: Countermeasure for an issue where the CPU usage
rate will be 30%-50% when resuming from Hibernation when a
USB mouse is connected to a USB 3.0 port.
- EC/KBC V1.20: Fixed a phenomenon where an AC Adapter
check error may occur after using the T&D to perform an
EC/KBC update.
- Note: Portege Z930/R930 and Tecra R940/R950 models
share a common BIOS from BIOS V2.10 and EC/KBC V1.20.
Version 3.50 - 2012-01-11
- Improved the "eco Utility" power consumption accuracy.
- Fixed: TPM in the BIOS Setup menu is not restricted
using User Policy.
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.30,
downgrading to earlier versions will not be possible.)
- Improved the BitLocker function - a BitLocker message
was displayed after resuming from Hibernation.
- Implemented a fix for an issue where the BIOS password
cannot be entered when configured as follows: 1. Wired USB
keyboard is connected to the port replicator. 2. Wireless
USB mouse is connected to a computer USB port. 3. Computer
is docked to the port replicator.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Local Boot processing from Linux PXE servers.
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a fix for an issue where the BIOS password
can't be entered with some USB keyboards.
- Fixed: If the computer is undocked from the port
replicator while transitioning to a sleep (Sx) state then
re-docked, the computer cannot detect the port replicator
after it is powered on.
Version 3.40 - 2011-11-22
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.40,
downgrading to earlier versions will not be possible.)
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a countermeasure for an issue where the
BIOS password cannot be entered on a USB Keyboard when the
USB Keyboard and Wireless USB Mouse are connected and the
system is docked.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Boot up LOGO screen for Japan models.
- Fixed: If the computer is undocked while shifting to a
sleep (Sx) state then re-docked, the computer cannot detect
the docker when powered back on.
Version 3.10 - 2011-09-02
- Implemented the INTEL specification for the Sandy
Bridge Processor to improve stability.
- Implemented a Linux PXE server local boot processing
improvement.
- Fixed: Screen flickers momentarily when connecting a
DisplayPort monitor with the docker. Updated the AMD
Seymour VGA BIOS on applicable models.
Version 3.00 - 2011-08-11
- Improved thermal control.
- Improved Hot Undock control in Windows XP.
- Improved a power-off issue.
- Improved an issue where the screen may flicker until
the OS starts while resuming from hibernation on external
GPU models.
- Improved stability when resuming from hibernation on
external GPU models.
Version 2.80 - 2011-06-30
- Added support for the VRAM Samsung 1GBit G-die.
- Implemented the INTEL specification for the Intel 6
Series Chipset (Cougar Point) to improve stability.
Version 2.70 - 2011-06-08
- Added support for the HD (1600x900) panels on Tecra
models.
- Implemented the Intel processor specification to
improve stability.
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 3.90_160 Taille: 5.61 Mb Système d'exploitation: Windows XP
Change History
-
Version 3.90_160 - 2012-09-12
- EC/KBC V1.60: Improved standby stability.
- EC/KBC V1.60: Modified the power supply error detection
method.
Version 3.90 - 2012-08-17
- Updated: MEBx to V7.0.0.0063.
- Fixed: Hangs at the Toshiba Logo when connected to a
specific express card.
- Implemented a CD Boot improvement.
Version 3.80 - 2012-07-09
- Improved memory initialization.
Version 3.70 - 2012-05-15
- Added: Internal USB3.0 Controller Mode in the BIOS
Setup Menu.
- EC/KBC V1.50: Improved the battery charge function.
(Note: After updating to EC/KBC V1.50, downgrading will not
be possible.)
- Note: BIOS V3.70 is ONLY for the Portege R830/R835
models.
Version 3.60 - 2012-02-09
- Added support for Brazilian keyboards.
- Added support for Celeron processors.
- Added support for Core i3 QM67 models.
- Improved: Power consumption accuracy of the "Toshiba
eco Utility."
- Improved: Serial communication of PC Card models.
- Implemented a fix for an issue where the BIOS password
cannot be entered with some USB keyboards.
- Implemented the Intel specification for Intel Internal
Graphics with 4Gbit Memory to improve stability.
- Added support for models configured without a Wireless
LAN module.
- Improved the Intel Rapid Start Technology of SSD
models: Resume takes a long time on SSD Internal ODD
models.
- Added: Countermeasure for an issue where the CPU usage
rate will be 30%-50% when resuming from Hibernation when a
USB mouse is connected to a USB 3.0 port.
- EC/KBC V1.20: Fixed a phenomenon where an AC Adapter
check error may occur after using the T&D to perform an
EC/KBC update.
- Note: Portege Z930/R930 and Tecra R940/R950 models
share a common BIOS from BIOS V2.10 and EC/KBC V1.20.
Version 3.50 - 2012-01-11
- Improved the "eco Utility" power consumption accuracy.
- Fixed: TPM in the BIOS Setup menu is not restricted
using User Policy.
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.30,
downgrading to earlier versions will not be possible.)
- Improved the BitLocker function - a BitLocker message
was displayed after resuming from Hibernation.
- Implemented a fix for an issue where the BIOS password
cannot be entered when configured as follows: 1. Wired USB
keyboard is connected to the port replicator. 2. Wireless
USB mouse is connected to a computer USB port. 3. Computer
is docked to the port replicator.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Local Boot processing from Linux PXE servers.
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a fix for an issue where the BIOS password
can't be entered with some USB keyboards.
- Fixed: If the computer is undocked from the port
replicator while transitioning to a sleep (Sx) state then
re-docked, the computer cannot detect the port replicator
after it is powered on.
Version 3.40 - 2011-11-22
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.40,
downgrading to earlier versions will not be possible.)
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a countermeasure for an issue where the
BIOS password cannot be entered on a USB Keyboard when the
USB Keyboard and Wireless USB Mouse are connected and the
system is docked.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Boot up LOGO screen for Japan models.
- Fixed: If the computer is undocked while shifting to a
sleep (Sx) state then re-docked, the computer cannot detect
the docker when powered back on.
Version 3.10 - 2011-09-02
- Implemented the INTEL specification for the Sandy
Bridge Processor to improve stability.
- Implemented a Linux PXE server local boot processing
improvement.
- Fixed: Screen flickers momentarily when connecting a
DisplayPort monitor with the docker. Updated the AMD
Seymour VGA BIOS on applicable models.
Version 3.00 - 2011-08-11
- Improved thermal control.
- Improved Hot Undock control in Windows XP.
- Improved a power-off issue.
- Improved an issue where the screen may flicker until
the OS starts while resuming from hibernation on external
GPU models.
- Improved stability when resuming from hibernation on
external GPU models.
Version 2.80 - 2011-06-30
- Added support for the VRAM Samsung 1GBit G-die.
- Implemented the INTEL specification for the Intel 6
Series Chipset (Cougar Point) to improve stability.
Version 2.70 - 2011-06-08
- Added support for the HD (1600x900) panels on Tecra
models.
- Implemented the Intel processor specification to
improve stability.
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 4.10 Taille: 5.62 Mb Système d'exploitation: Windows XP
Change History
-
Version 4.10 - 2013-01-11
- Fixed: Computer will not boot when a certain PCI
express card is connected.
- Improved the boot time when a Toshiba USB HDD with a
registered HDD password is connected to a USB 2.0 port.
- Implemented a USB CD Boot improvement.
Version 3.90_160 - 2012-09-12
- EC/KBC V1.60: Improved standby stability.
- EC/KBC V1.60: Modified the power supply error detection
method.
Version 3.90 - 2012-08-17
- Updated: MEBx to V7.0.0.0063.
- Fixed: Hangs at the Toshiba Logo when connected to a
specific express card.
- Implemented a CD Boot improvement.
Version 3.80 - 2012-07-09
- Improved memory initialization.
Version 3.70 - 2012-05-15
- Added: Internal USB3.0 Controller Mode in the BIOS
Setup Menu.
- EC/KBC V1.50: Improved the battery charge function.
(Note: After updating to EC/KBC V1.50, downgrading will not
be possible.)
- Note: BIOS V3.70 is ONLY for the Portege R830/R835
models.
Version 3.60 - 2012-02-09
- Added support for Brazilian keyboards.
- Added support for Celeron processors.
- Added support for Core i3 QM67 models.
- Improved: Power consumption accuracy of the "Toshiba
eco Utility."
- Improved: Serial communication of PC Card models.
- Implemented a fix for an issue where the BIOS password
cannot be entered with some USB keyboards.
- Implemented the Intel specification for Intel Internal
Graphics with 4Gbit Memory to improve stability.
- Added support for models configured without a Wireless
LAN module.
- Improved the Intel Rapid Start Technology of SSD
models: Resume takes a long time on SSD Internal ODD
models.
- Added: Countermeasure for an issue where the CPU usage
rate will be 30%-50% when resuming from Hibernation when a
USB mouse is connected to a USB 3.0 port.
- EC/KBC V1.20: Fixed a phenomenon where an AC Adapter
check error may occur after using the T&D to perform an
EC/KBC update.
- Note: Portege Z930/R930 and Tecra R940/R950 models
share a common BIOS from BIOS V2.10 and EC/KBC V1.20.
Version 3.50 - 2012-01-11
- Improved the "eco Utility" power consumption accuracy.
- Fixed: TPM in the BIOS Setup menu is not restricted
using User Policy.
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.30,
downgrading to earlier versions will not be possible.)
- Improved the BitLocker function - a BitLocker message
was displayed after resuming from Hibernation.
- Implemented a fix for an issue where the BIOS password
cannot be entered when configured as follows: 1. Wired USB
keyboard is connected to the port replicator. 2. Wireless
USB mouse is connected to a computer USB port. 3. Computer
is docked to the port replicator.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Local Boot processing from Linux PXE servers.
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a fix for an issue where the BIOS password
can't be entered with some USB keyboards.
- Fixed: If the computer is undocked from the port
replicator while transitioning to a sleep (Sx) state then
re-docked, the computer cannot detect the port replicator
after it is powered on.
Version 3.40 - 2011-11-22
- Implemented the Intel specification for Intel Chipsets
to improve stability. (Note: After updating to BIOS 3.40,
downgrading to earlier versions will not be possible.)
- Improved: Control of TPM on Intel TXT enabled systems.
- Implemented a countermeasure for an issue where the
BIOS password cannot be entered on a USB Keyboard when the
USB Keyboard and Wireless USB Mouse are connected and the
system is docked.
- Improved: Dock power control while powered off to
improve stability.
- Improved: Boot up LOGO screen for Japan models.
- Fixed: If the computer is undocked while shifting to a
sleep (Sx) state then re-docked, the computer cannot detect
the docker when powered back on.
Version 3.10 - 2011-09-02
- Implemented the INTEL specification for the Sandy
Bridge Processor to improve stability.
- Implemented a Linux PXE server local boot processing
improvement.
- Fixed: Screen flickers momentarily when connecting a
DisplayPort monitor with the docker. Updated the AMD
Seymour VGA BIOS on applicable models.
Version 3.00 - 2011-08-11
- Improved thermal control.
- Improved Hot Undock control in Windows XP.
- Improved a power-off issue.
- Improved an issue where the screen may flicker until
the OS starts while resuming from hibernation on external
GPU models.
- Improved stability when resuming from hibernation on
external GPU models.
Version 2.80 - 2011-06-30
- Added support for the VRAM Samsung 1GBit G-die.
- Implemented the INTEL specification for the Intel 6
Series Chipset (Cougar Point) to improve stability.
Version 2.70 - 2011-06-08
- Added support for the HD (1600x900) panels on Tecra
models.
- Implemented the Intel processor specification to
improve stability.
Version 2.60 - 2011-05-13
- Updated the Tecra/Satellite R840 AMD VGA BIOS -
Optimized stretch.
Version 2.40 - 2011-05-09
- Updated the Tecra/Satellite R840 AMD VGA BIOS - Changed
the value of AMD PowerPlay when using the internal LCD and
an external display.
Version 2.30 - 2011-04-11
- Updated the TPM specification to improve stability.
- Updated the Tecra R840 AMD VGA BIOS.
Version 2.10 - 2011-03-04
- Implemented a change to the TOSHIBA PC Health Monitor
battery state display.
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 1.50 Taille: 5.39 Mb Système d'exploitation: Windows XP
Change History
-
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: BIOS Version: 2.00 Taille: 5.39 Mb Système d'exploitation: Windows XP
Change History
-
Version 2.00 - 2011-03-01
- Implemented the Intel Cougar Point Reference Code
Update and Cougar Point B3-step CRID support.
- Implemented the Intel Sandy Bridge Reference Code
Update.
- Fixed: Targus USB Mouse is not recognized after
resuming from hibernation.
Version 1.50 - 2011-01-27
- Initial production BIOS for these models.
|
Type de fichier: Driver Version: 8.0.35 Taille: 60.29 Mb Système d'exploitation: Windows 7 (64)
ConfigFree? is a set of utilities used for configuring
Toshiba PCs to use both wired and wireless network devices.
|
Type de fichier: Applicazione Version: 2.1.0.6 Taille: 13.17 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Applicazione Version: 2.1.0.9 Taille: 10.9 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Applicazione Version: 2.1.0.7.rebuild Taille: 10.89 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Applicazione Version: 2.1.0.10 Taille: 10.9 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Applicazione Version: 2.1.0.9 for x64 Taille: 9.65 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Applicazione Version: 2.1.0.11 for x64 Taille: 9.62 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 5.90.18 Taille: 69.27 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 1.1.0.0b Taille: 3.9 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 3.0.32.4-14_wMSI Taille: 2.28 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 3.1.0.7 Taille: 35.17 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 3.1.0.8.rebuild Taille: 31.89 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 3.1.0.9 Taille: 31.85 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 3.1.64.6 Taille: 37.13 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 3.1.64.7 Taille: 35.31 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 3.1.64.8 Taille: 32.07 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 3.1.64.8.rebuild Taille: 32.08 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 3.1.64.9 Taille: 32.08 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.2.24.0 Taille: 14.49 Mb Système d'exploitation: Windows 7 (32)
Please install after installing TVAP.
|
Type de fichier: Utilitaire Version: 1.3.2.0 Taille: 15.16 Mb Système d'exploitation: Windows 7 (32)
Please install after installing TVAP.
|
Type de fichier: Utilitaire Version: 1.3.5.0 Taille: 15.17 Mb Système d'exploitation: Windows 7 (32)
Please install after installing TVAP.
|
Type de fichier: Utilitaire Version: 1.7.3.0 Taille: 27.56 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 1.7.4.0 Taille: 27.76 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 1.7.7.0 Taille: 22.9 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 1.7.9.0 Taille: 22.89 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 1.7.4.64 Taille: 27.87 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.7.5.64 Taille: 23.42 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.7.7.64 Taille: 23.19 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.7.9.64 Taille: 23.19 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.2.21.64 Taille: 18.57 Mb Système d'exploitation: Windows 7 (64)
Please install after installing TVAP.
|
Type de fichier: Utilitaire Version: 1.2.24.64 Taille: 14.89 Mb Système d'exploitation: Windows 7 (64)
Please install after installing TVAP.
|
Type de fichier: Utilitaire Version: 1.3.2.64 Taille: 15.57 Mb Système d'exploitation: Windows 7 (64)
Please install after installing TVAP.
|
Type de fichier: Utilitaire Version: 1.3.5.64 Taille: 15.57 Mb Système d'exploitation: Windows 7 (64)
Please install after installing TVAP.
|
Type de fichier: Utilitaire Version: V2.01.10 Taille: 7.79 Mb Système d'exploitation: Windows XP
PASSWORD UTILITY
This utility adds additional password security to your Toshiba
computer. After registering a user password, you will be
required to input it when booting the computer or starting the
Password Utility. Refer to your Owner's Manual for complete
details.
To open the Password Utility:
- Click the Start menu.
- Enter "Password" into the search field.
- Click "Password Utility" in the search results.
- The Password Utility will open allowing you to set, delete
or change the password.
- Set password will regsiter a user password with the
computer.
- Delete allows you to delete the regsitered user
password.
- Change allows you to change the regsitered user password.
When setting a password, you can apply it to the HDD. For
information about this feature, click on "Learn More...".
|
Type de fichier: Utilitaire Version: 2.5.5.0 Taille: 3.83 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 1.03.00_I Taille: 3.37 Mb Système d'exploitation: Windows XP |
Type de fichier: Driver Version: 3.0.0.9 Taille: 5.39 Mb Système d'exploitation: Windows XP |
Type de fichier: Driver Version: 7.5.86 Taille: 9.38 Mb Système d'exploitation: Windows 8 (32)
IntelR PROSet/Wireless WiMAX Software v7.5 BETA Version
|
Type de fichier: Utilitaire Version: V3.8.2.0 Taille: 2.54 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: V3.5.2.0 Taille: 2.21 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: V3.94.03.XP Taille: 4.5 Mb Système d'exploitation: Windows XP |
Type de fichier: Driver Version: 2.3.0.xp86 Taille: 10.83 Mb Système d'exploitation: Windows XP
IntelR PROSet/Wireless WiMAX Software v6.2.1 PV(RTM) Version
|
Type de fichier: Applicazione Version: 2.50.1.07-A Taille: 54.91 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: V6.07.02 Taille: 3.82 Mb Système d'exploitation: Windows XP |
Type de fichier: Applicazione Version: 2.0.10 Taille: 80.24 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 10.1.0.1008 Taille: 11.86 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 1.0.2.33 Taille: 131.12 Mb Système d'exploitation: Windows 7 (64)
version: 8.615-090609a-083247C-Toshiba
|
Type de fichier: Driver Version: 8.15.10.2291 Taille: 66.45 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Driver Version: 8.15.10.2353 Taille: 67.1 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Driver Version: 8.15.10.2430 Taille: 69.13 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Driver Version: 8.15.10.2255 Taille: 60.45 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 8.15.10.2291 Taille: 81.44 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 8.15.10.2353 Taille: 82.2 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 8.15.10.2430 Taille: 86.38 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 7.x6.303.106_A Taille: 39.57 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 8.00.02(T) Taille: 78.06 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: v8.00.04(T) Taille: 78.09 Mb Système d'exploitation: Windows XP |
Type de fichier: Driver Version: 8.00.05(T) Taille: 78.08 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 5.10.0.6297 Taille: 32.79 Mb Système d'exploitation: Windows XP |
Type de fichier: Driver Version: 5.10.0.6121 Taille: 21.18 Mb Système d'exploitation: Windows XP |
Type de fichier: Driver Version: 8.812.3.1 Taille: 93.83 Mb Système d'exploitation: Windows XP
8.812.3.1-110309a-115036C-Toshiba
|
Type de fichier: Driver Version: 10.1.0.1008 Taille: 433.08 Kb Système d'exploitation: Windows XP |
Type de fichier: Driver Version: 9.2.0.234.0.x32_wCAT Taille: 24.92 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 8.0.0.189.0.x32_wCAT Taille: 29.84 Mb Système d'exploitation: Windows XP
Version: 8.0.0.189.0.x32_wCAT
|
Type de fichier: Driver Version: 6.14.10.5337 Taille: 24.44 Mb Système d'exploitation: Windows XP |
Type de fichier: Driver Version: 14.0.2.2.1.x32_wCAT Taille: 9.07 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 14.0.2.0.1.x32 Taille: 36.83 Mb Système d'exploitation: Windows XP
This is the Intel PROSet utility for the Wireless LAN controller.
This utility controls the driver for the Wireless LAN Controller.
|
Type de fichier: Utilitaire Version: 1.0.3.0 Taille: 8.28 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 1.0.2.0M_64 Taille: 8.29 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.0.3.0_64 Taille: 8.28 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 8.00.02(T) Taille: 18.35 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 8.00.02(T) Taille: 83.69 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.5.3_64 Taille: 78.53 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.5.10.64 Taille: 81.65 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.5.3 Taille: 74.27 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 1.5.10 Taille: 77.37 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Driver Version: 1.0.2.37 Taille: 55.62 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 14.0.2.2.1.s32_wCAT Taille: 9.18 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 14.0.2.0.1.s32_wCAT Taille: 38.08 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Driver Version: 14.0.2.2.1.s64_wCAT Taille: 10.11 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 14.0.2.0.1.s64_wCAT Taille: 43.2 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 6.3.2.1 [R4C01] Taille: 45.99 Mb Système d'exploitation: Windows XP |
Type de fichier: Driver Version: 1.0.2.39 Taille: 55.62 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 14.1.1.3.1.s32_wCAT Taille: 9.23 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 14.1.1.0.1.s32_wCAT Taille: 41.56 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Driver Version: 14.1.1.3.1.s64_wCAT Taille: 10.16 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 14.1.1.0.1.s64_wCAT Taille: 46.56 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.6.3 Taille: 78.18 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 1.6.3.64 Taille: 82.48 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 9.3.0.1021 Taille: 5.79 Mb Système d'exploitation: Windows 8 (64) |
Type de fichier: Driver Version: 2.0.0.3 Taille: 6.73 Mb Système d'exploitation: Windows 8 (64)
This is TVALZ test driver
|
Type de fichier: Driver Version: 2.0.0.3 [x86] Taille: 6.6 Mb Système d'exploitation: Windows 8 (32)
This is TVALZ test driver
|
Type de fichier: Driver Version: 15.5.0.43.6.e64 Taille: 8.39 Mb Système d'exploitation: Windows 8 (64)
15.5.0.43.6.e64_wCAT
|
Type de fichier: Driver Version: 15.5.0.43.6.e32 Taille: 7.84 Mb Système d'exploitation: Windows 8 (32)
15.5.0.43.6.e32_wCAT
|
Type de fichier: Utilitaire Version: 15.5.2.0.6.e64 Taille: 69.38 Mb Système d'exploitation: Windows 8 (64)
15.5.2.0.6.e64_wCAT
|
Type de fichier: Utilitaire Version: 15.5.2.0.6.e32 Taille: 62.11 Mb Système d'exploitation: Windows 8 (32)
15.5.2.0.6.e32_wCAT
|
Type de fichier: Driver Version: 1.00.0012 Taille: 10.25 Mb Système d'exploitation: Windows 8 (64)
Install before other Toshiba Utilities.
This is TVALZ test driver
|
Type de fichier: Utilitaire Version: v1.1.1.0_64 Taille: 9.26 Mb Système d'exploitation: Windows 8 (64)
Toshiba Intelligent Display Management controls the power of
displays which are connected to PC.
It enhances Display Auto off function (“Turn off the display”
after a set time) of the Operating System.
Currently the OS can only turn off all displays at the same time.
This manager can turn off each display based on if it is used or
not.
|
Type de fichier: Driver Version: v1.1.1.0 Taille: 9.26 Mb Système d'exploitation: Windows 8 (32)
Toshiba Intelligent Display Management controls the power of
displays which are connected to PC.
It enhances Display Auto off function (“Turn off the display”
after a set time) of the Operating System.
Currently the OS can only turn off all displays at the same time.
This manager can turn off each display based on if it is used or
not.
|
Type de fichier: Driver Version: 9.17.10.2843 Taille: 114.27 Mb Système d'exploitation: Windows 8 (32) |
Type de fichier: Driver Version: 2.3.0.64 Taille: 10.7 Mb Système d'exploitation: Windows 7 (64)
IntelR PROSet/Wireless WiMAX Software v2.1 PV(RTM) Version
|
Type de fichier: Driver Version: 6.2.1.64 Taille: 10.9 Mb Système d'exploitation: Windows 7 (64)
IntelR PROSet/Wireless WiMAX Software v2.1 PV(RTM) Version
|
Type de fichier: Driver Version: 2.3.0.86 Taille: 9.91 Mb Système d'exploitation: Windows 7 (32)
IntelR PROSet/Wireless WiMAX Software v2.1 PV(RTM) Version
|
Type de fichier: Driver Version: 6.2.1.86 Taille: 10.38 Mb Système d'exploitation: Windows 7 (32)
IntelR PROSet/Wireless WiMAX Software v2.1 PV(RTM) Version
|
Type de fichier: Utilitaire Version: 4.01.00.ES Taille: 6.1 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 4.02.02.ES Taille: 4.52 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.7.3.64 Taille: 27.85 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 3.1.0.8 Taille: 31.89 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 3.1.8 Taille: 110.24 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Utilitaire Version: 1.4.0.0 Taille: 5.39 Mb Système d'exploitation: Windows 7 (32) |
Type de fichier: Applicazione Version: 2.1.0.4 for x64 Taille: 18.68 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.4.4_64 Taille: 165.26 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Applicazione Version: 2.1.0.6 for x64 Taille: 21.84 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: v3.37.4310 Taille: 8.45 Mb Système d'exploitation: Windows XP |
Type de fichier: Driver Version: 2.1.1.0 Taille: 2.46 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 3.2.15 Taille: 12.72 Mb Système d'exploitation: Windows XP
PC DIAGNOSTIC TOOL
This utility can display the basic information of a computer
and diagnose its built-in devices. However, assume that the
diagnostic is for reference only. This product performs a
diagnostic based on "Diagnostic Method for Main Components and
Its Results." Therefore, hardware that is diagnosed as normal
still may not actually be usable. When using this product, use
the computer on which it is preinstalled or to which it is
attached.
To open the PC Diagnostic Tool utility:
- Click the Start menu.
- Enter "Diagnostic" into the search field.
- Click "PC Diagnostic Tool" in the search results.
- The PC Diagnostic Tool will open showing basic computer
information.
- Click the "Diagnostic Tool" tab to open the diagnostic
portion of the utility.
- Select the items you want to run diagnostics for and click
"Start Diagnostic".
- The PC Diagnostic Tool will run checks on the selected
components and report back.
|
Type de fichier: Utilitaire Version: 1.2.2 Taille: 5.85 Mb Système d'exploitation: Windows XP
SECURITY ASSIST
The TOSHIBA Security Assist Utility acts as a “command center”
where you can set up various passwords or other security
features, and see how these features can be used with each
other to increase security even further, or to simplify the
ways that you protect your system. For detailed information
about TOSHIBA Security Assist Utility, refer to your Owner's
Manual.
To open Security Assist:
- Click the Start menu.
- Enter "Security" into the search field.
- Click "Security Assist" in the search results.
- Security Assist will open.
From the main window, you can select a category that shows the
type of passwords or other security features that can be used
in that scenario.
|
Type de fichier: Utilitaire Version: 2.0.0.26 Taille: 3.72 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: v2.0.1 Taille: 33.76 Mb Système d'exploitation: Windows XP |
Type de fichier: Driver Version: 1.0.5.13 Taille: 4.82 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Driver Version: 1.0.85.4 Taille: 13.65 Mb Système d'exploitation: Windows 7 (64) |
Type de fichier: Utilitaire Version: 1.0.0.1 Taille: 2.13 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 4.30.30 Taille: 9.21 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 2.3.0.3 Taille: 7.86 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 7.14.03 Taille: 13.85 Mb Système d'exploitation: Windows XP |
Type de fichier: Utilitaire Version: 1.6.0128.320201 Taille: 104.2 Mb Système d'exploitation: Windows 8 (32)
TOSHIBA VALUE ADDED PACKAGE
The Toshiba Value Added Package (TVAP) provides an essential
link to system resources required by several TOSHIBA original
program components for access to BIOS functions etc, such as:
- TOSHIBA eco Utility provides extended power control options
to our customers over devices in Toshiba notebooks. Reduction
in power consumption by switching to optimum power settings
based on plugged-in or on battery power machine status, or
remaining battery power percentage.
- TOSHIBA HWSetup lets you customize your hardware settings
according to the way that you work with your computer and the
peripherals you use.
- TOSHIBA Password Utility lets you set and maintain password
security that restricts access to the computer.
- TOSHIBA Flash Cards provides additional Hotkey (Function Fn
keys) functionality to Toshiba notebooks and includes an
intelligent user interface (UI) in the form of a graphical
drop-down invoked by hotkey operation. This improves the user
experience by allowing them to visually identify current status
and available options at time of selection, saving them time
spent blindly moving between the hot-key options to find the
one they need.
- TOSHIBA PC Diagnostic Tool can display the basic
information of a computer and diagnose simple issues using
Windows built-in toolset.
TVAP should be installed before other Toshiba Utility files to
ensure their proper functioning.
If TVAP is not installed on your computer, you can verify if it
is available for your specific model under "Downloads" on the
TOSHIBA support web site (support.toshiba.com).
|
Type de fichier: Utilitaire Version: 1.6.0128.640201 Taille: 108.51 Mb Système d'exploitation: Windows 8 (64)
TOSHIBA VALUE ADDED PACKAGE
The Toshiba Value Added Package (TVAP) provides an essential
link to system resources required by several TOSHIBA original
program components for access to BIOS functions etc, such as:
- TOSHIBA eco Utility provides extended power control options
to our customers over devices in Toshiba notebooks. Reduction
in power consumption by switching to optimum power settings
based on plugged-in or on battery power machine status, or
remaining battery power percentage.
- TOSHIBA HWSetup lets you customize your hardware settings
according to the way that you work with your computer and the
peripherals you use.
- TOSHIBA Password Utility lets you set and maintain password
security that restricts access to the computer.
- TOSHIBA Flash Cards provides additional Hotkey (Function Fn
keys) functionality to Toshiba notebooks and includes an
intelligent user interface (UI) in the form of a graphical
drop-down invoked by hotkey operation. This improves the user
experience by allowing them to visually identify current status
and available options at time of selection, saving them time
spent blindly moving between the hot-key options to find the
one they need.
- TOSHIBA PC Diagnostic Tool can display the basic
information of a computer and diagnose simple issues using
Windows built-in toolset.
TVAP should be installed before other Toshiba Utility files to
ensure their proper functioning.
If TVAP is not installed on your computer, you can verify if it
is available for your specific model under "Downloads" on the
TOSHIBA support web site (support.toshiba.com).
|
Type de fichier: Utilitaire Version: 1.3.22.0 Taille: 15.49 Mb Système d'exploitation: Windows 8 (32)
Please install after installing TVAP and display driver.
|
Type de fichier: Utilitaire Version: 1.3.22.64 Taille: 15.94 Mb Système d'exploitation: Windows 8 (64)
Please install after installing TVAP and display driver.
|
Type de fichier: Utilitaire Version: 1.6.0130.640202 Taille: 108.94 Mb Système d'exploitation: Windows 8 (64)
TOSHIBA Value Added Package (64bit)
|
Type de fichier: Utilitaire Version: 1.6.0130.640204 Taille: 109.34 Mb Système d'exploitation: Windows 8 (64)
TOSHIBA VALUE ADDED PACKAGE
The Toshiba Value Added Package (TVAP) provides an essential
link to system resources required by several TOSHIBA original
program components for access to BIOS functions etc, such as:
- TOSHIBA eco Utility provides extended power control options
to our customers over devices in Toshiba notebooks. Reduction
in power consumption by switching to optimum power settings
based on plugged-in or on battery power machine status, or
remaining battery power percentage.
- TOSHIBA HWSetup lets you customize your hardware settings
according to the way that you work with your computer and the
peripherals you use.
- TOSHIBA Password Utility lets you set and maintain password
security that restricts access to the computer.
- TOSHIBA Flash Cards provides additional Hotkey (Function Fn
keys) functionality to Toshiba notebooks and includes an
intelligent user interface (UI) in the form of a graphical
drop-down invoked by hotkey operation. This improves the user
experience by allowing them to visually identify current status
and available options at time of selection, saving them time
spent blindly moving between the hot-key options to find the
one they need.
- TOSHIBA PC Diagnostic Tool can display the basic
information of a computer and diagnose simple issues using
Windows built-in toolset.
TVAP should be installed before other Toshiba Utility files to
ensure their proper functioning.
If TVAP is not installed on your computer, you can verify if it
is available for your specific model under "Downloads" on the
TOSHIBA support web site (support.toshiba.com).
|
Type de fichier: Utilitaire Version: 1.6.0130.320202 Taille: 104.57 Mb Système d'exploitation: Windows 8 (32)
TOSHIBA Value Added Package (32bit)
|
Type de fichier: Utilitaire Version: 1.6.0130.320204 Taille: 104.92 Mb Système d'exploitation: Windows 8 (32)
TOSHIBA VALUE ADDED PACKAGE
The Toshiba Value Added Package (TVAP) provides an essential
link to system resources required by several TOSHIBA original
program components for access to BIOS functions etc, such as:
- TOSHIBA eco Utility provides extended power control options
to our customers over devices in Toshiba notebooks. Reduction
in power consumption by switching to optimum power settings
based on plugged-in or on battery power machine status, or
remaining battery power percentage.
- TOSHIBA HWSetup lets you customize your hardware settings
according to the way that you work with your computer and the
peripherals you use.
- TOSHIBA Password Utility lets you set and maintain password
security that restricts access to the computer.
- TOSHIBA Flash Cards provides additional Hotkey (Function Fn
keys) functionality to Toshiba notebooks and includes an
intelligent user interface (UI) in the form of a graphical
drop-down invoked by hotkey operation. This improves the user
experience by allowing them to visually identify current status
and available options at time of selection, saving them time
spent blindly moving between the hot-key options to find the
one they need.
- TOSHIBA PC Diagnostic Tool can display the basic
information of a computer and diagnose simple issues using
Windows built-in toolset.
TVAP should be installed before other Toshiba Utility files to
ensure their proper functioning.
If TVAP is not installed on your computer, you can verify if it
is available for your specific model under "Downloads" on the
TOSHIBA support web site (support.toshiba.com).
|
Type de fichier: Utilitaire Version: 1.3.22.0 Taille: 15.49 Mb Système d'exploitation: Windows 8 (32) |
Type de fichier: Utilitaire Version: 1.3.22.64 Taille: 15.94 Mb Système d'exploitation: Windows 8 (64)
Please install after installing TVAP and display driver.
|