TOSHIBA SATELLITE PRO 4280XDVD

Date: septembre 21st, 2013

Pour télécharger les drivers pour TOSHIBA SATELLITE PRO 4280XDVD pour Windows, Non-OS, Windows XP, Windows ME, Windows 98, Windows 95, Windows 2000, Windows NT, Other, cliquez sur "Télécharger". Si vous avez besoin d'un drivers d'une autre version, envoyez une demande de driver. Si vous avez des questions sur ce driver, veuillez nous contacter via le formulaire de contact. Sur cette page, vous pouvez discuter notamment de l'installation, la désinstallation et la mise à jour du driver.

Modèle:
4280XDVD
Editeur:
Toshiba
Type de périphérique:
Portables, netbooks / Satellite Pro
Licence:
Gratuit

Windows Non-OS

Windows

Type de fichier: BIOS
Version: 2.2.97
Taille: 672.11 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 1.40 for Satellite Pro 4260/4280.

CHANGE HISTORY

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Type de fichier: BIOS
Version: 8.0.23
Taille: 672.58 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 1.60 for Satellite Pro 4260/4280.

CHANGE HISTORY

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.
Type de fichier: BIOS
Version: 1.1.1.9
Taille: 682.22 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 1.80 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD.
Type de fichier: BIOS
Version: 12.4.1.11.0.s64_wCAT
Taille: 686.78 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 2.00 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Type de fichier: BIOS
Version: 1.62.0.5C
Taille: 688.07 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 2.10 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Type de fichier: BIOS
Version: 3.01.0.07-A
Taille: 687.79 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 2.20 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Type de fichier: BIOS
Version: 5.10.0.5904
Taille: 689.3 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 2.40 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Type de fichier: BIOS
Version: 13.2.6.1
Taille: 688.98 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 2.50 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.50  08-02-2000

  • Corrected a problem where the computer would not see the FDD when running under Windows 95, causing the computer to hang. This problem would only occur on computers manufactured with a PCB containing the Super I/O chip.

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Type de fichier: BIOS
Version: 6.0.6000.86
Taille: 689.42 Kb
Système d'exploitation: Windows XP
ACPI Flash BIOS version 2.60 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.60  07-27-2000

  • Corrected an infrequent problem that slowed the speed of a system reboot, when the reset switch was used.
  • Corrected a problem when running Windows ME, that would cause the system to hang when suspending/resuming the computer after switching Step Speed.
  • Fixed an issue that caused one line on the right side of the display to not be seen, when the CRT setting was 1600x1200 at 75Hz.

Version 2.50  08-02-2000

  • Corrected a problem where the computer would not see the FDD when running under Windows 95, causing the computer to hang. This problem would only occur on computers manufactured with a PCB containing the Super I/O chip.

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Type de fichier: BIOS
Version: 8.634.1
Taille: 690.67 Kb
Système d'exploitation: Windows XP

CHANGE HISTORY

Version 2.70 ?07-26-2001

  • A change was made to correct a problem that some PC cards with a single spec for 16 bit and 3.3VDC may malfunction.
  • Corrected a problem of no LCD display after using Suspend/Resume.

Version 2.60 ?07-27-2000

  • Corrected an infrequent problem that slowed the speed of a system reboot, when the reset switch was used.
  • Corrected a problem when running Windows ME, that would cause the system to hang when suspending/resuming the computer after switching Step Speed.
  • Fixed an issue that caused one line on the right side of the display to not be seen, when the CRT setting was 1600x1200 at 75Hz.

Version 2.50 ?08-02-2000

  • Corrected a problem where the computer would not see the FDD when running under Windows 95, causing the computer to hang. This problem would only occur on computers manufactured with a PCB containing the Super I/O chip.

Version 2.40 ?07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20 ?06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10 ?06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.
Type de fichier: Applicazione
Version: 1.00
Taille: 310.42 Kb
Système d'exploitation: Windows 98

Change History

  • Version 1.00 - 2009-09-11
    • Initial production BIOS for these models.
Type de fichier: Applicazione
Version: 9.11.64
Taille: 7.92 Mb
Système d'exploitation: Windows ME, Windows 98, Windows 95, Windows 2000, Windows NT
Logitech MouseWarex, 2000.
Type de fichier: Driver
Version: 9.0.0.1011
Taille: 1.58 Mb
Système d'exploitation: Windows NT
Windows NT Advanced Power Management Subsystem version 2.05.33.
This version is updated to eliminate a CPU speed change while playing sounds.

Notes:

  1. If the previous version is installed in the system, uninstall it and reboot the PC before installing the new one.
  2. When applying the WindowsNT Service Pack, fist uninstall Toshiba Power Management (TPM), apply Service Pack, then re-install TPM. Note that TPM was certified on SP3 & SP4 & SP5 & SP6 only, so there is no assurance that it will work with future versions of Service Pack.
  3. The capability to resume PC cards after resuming depends on the HotSwap function of CardWizard and HotSwappable drivers. This capability does not work without them.
  4. Suspend request will be rejected by CardWizard when a non-HotSwappable card or ATA with open handle are in use.
  5. The system will be put into instant security mode but not actual suspend mode, when it is docked with a docking station(DS) and expansion station(EXP) and media docker(MD). This is because the option cards and SCSI in DS and EXP and MD do not support TPM. Actual suspend will cause loss of network connection and incorrect action by the SCSI device.
  6. System Auto Off does not work if Auto Run is enabled. Auto Run causes periodic interrupt, due to accessing the CD-ROM, and it prevents detection of system idle. Some unknown software may prevent System Auto Off from functioning for the same reason, even if the system appears to be idle.
  7. Ring resume function is supported with the internal modem only. It does not work with PC card modems.
Type de fichier: Driver
Version: 3.1.0.2
Taille: 1.51 Mb
Système d'exploitation: Windows NT
This driver provides important information about the HDD and SSD devices in your computer.

Changes From Previous Version

  1. When SSD/HDD Alert (V3.1.0.2) is applied to applicable Windows 7 models, the shut down speed will improve by two to three seconds.

Installation Instructions

  1. Save this file to a convenient location such as the Windows Desktop
  2. Save all work in progress and close open applications.
  3. Double-click the downloaded file icon on the Windows Desktop.
  4. Click Start.
  5. If a User Account Control (UAC) Window is displayed, click Yes.
  6. Click Yes to confirm the upgrade.
  7. Click Next to resume, and Finish to complete the installation.

Type de fichier: Driver
Version: 2.1.0.1
Taille: 1.05 Mb
Système d'exploitation: Windows 2000
Windows 2000 Display Driver version 7.30.38-RC3 for S3 Savage MX/IX display adapter.
Type de fichier: Driver
Version: 1.4.1.0
Taille: 71.63 Kb
Système d'exploitation: Windows XP
Type de fichier: Driver
Version: 1.63.0.11C
Taille: 1.02 Mb
Système d'exploitation: Windows XP
Mobile Extensions provide Docking support (warm-dock/undock, eject password, etc.) functionality. Requires Toshiba ACPI common modules (TVALD).
Type de fichier: Applicazione
Version: 3.02.02
Taille: 2.06 Mb
Système d'exploitation: Windows XP, Windows 2000
Toshiba Utilities provide the HWSetup application and the FnEsse task switcher application. Requires Toshiba ACPI Common Modules (TVALD).
Type de fichier: Driver
Version: 1.01
Taille: 1.57 Mb
Système d'exploitation: Windows NT
Toshiba Windows NT APM Subsystem version 2.05.27.
Type de fichier: Driver
Version: 1.0.0.196.0
Taille: 769.65 Kb
Système d'exploitation: Windows NT
1.0.0.196.0.s3264_wCAT
Type de fichier: Driver
Version: 1.0.0.3119C
Taille: 1.27 Mb
Système d'exploitation: Windows XP
This software is the foundation for the other Toshiba-provided utilities and power management software, and must be installed prior to installing other Toshiba software. Some Toshiba applications may refer to this as TVALD (for Toshiba Value-Added Logic Device).
Type de fichier: Driver
Version: 3.1.0.0
Taille: 660.41 Kb
Système d'exploitation: Windows 2000
Windows 2000 Modem Driver version MR577ALL004 for 56k V.90 Internal Modems.
Type de fichier: Applicazione
Version: 1.62.0.3C
Taille: 31.5 Kb
Système d'exploitation: Windows 98
Windows 98 PCMCIA.INF file version 1.0-RC2 for Satellite 2615/2655.
Type de fichier: Driver
Version: 2.2.97
Taille: 1.73 Mb
Système d'exploitation: Windows ME
Windows Me Display Driver version 7.13.26-01 for S3 Savage/IX display adapters.
Type de fichier: Applicazione
Version: 1.03
Taille: 277.63 Kb
Système d'exploitation: Windows 98, Windows 95
Windows 95/98 DVDFAST.VXD version 1.03 for Satellite 4090/4100. Improves suspend/resume time on DVD-equipped models.
Type de fichier: Driver
Version: 2.2.97
Taille: 341.88 Kb
Système d'exploitation: Windows 2000
Version: 2.2.97(SM2297ALS05)
LSI Modem Driver (not include Region Select Utility) inf check & check HWID in setup.exe Please do following step when you setup modem module 1)run MDSegSet (If you have not used MDREGSET, please make telephonyLocation.) 2)run modem setup 3)run RegionSelect Utility setup
Type de fichier: Driver
Version: 1.03.00upd4
Taille: 4.79 Mb
Système d'exploitation: Windows 2000
Windows 2000 Sound Driver version 4.10.2224 for Yamaha DS-XG sound system.
Type de fichier: Applicazione
Version: 2.0.
Taille: 1.65 Mb
Système d'exploitation: Windows 98, Windows 95
Toshiba Software Upgrade version 2.0. This application automatically updates device drivers and BIOS as they become available from Toshiba.
Type de fichier: Applicazione
Version: 2.0.
Taille: 43.66 Kb
Système d'exploitation: Windows 98, Windows 95
Windows 95/98 Hibernation File Make Utility version 2.0.
Type de fichier: Driver
Version: 1.00.00
Taille: 863.16 Kb
Système d'exploitation: Windows NT
This is a registry patch that corrects a problem where Toshiba Utilities such as Flash Cards, Zooming, and ECO Utilities, will not work after using the Windows 7 "Restore from System Image Backup" feature.

Install Instructions

  1. Save the file to the Windows Desktop.
  2. Save all work in progress and close open applications.
  3. On the Windows Desktop, double-click the downloaded file to start the installation.
  4. Click Start at the TOSHIBA Archive Extractor window.
  5. Click Yes if a User Account Control window is displayed.
  6. The program will complete quickly.
  7. Restart the computer.
  8. Toshiba Utilities will work normally again.
Type de fichier: Driver
Version: 7.x5.303.117
Taille: 590.61 Kb
Système d'exploitation: Windows XP
Type de fichier: Driver
Version: 1.1.0.0b
Taille: 1.28 Mb
Système d'exploitation: Windows 95
Toshiba Windows 95 Infrared Driver version 1.30.
Type de fichier: Driver
Version: 1.45
Taille: 287.63 Kb
Système d'exploitation: Windows 98, Windows 95
Windows 98 NDIS driver version 1.45 for MSIR (Microsoft Infrared) 3.0.
Type de fichier: Applicazione
Version: 7.003.0522.2009
Taille: 276.64 Kb
Système d'exploitation: Windows 95
Windows 95 PCMCIA.INF file version 1.2.
Type de fichier: Driver
Version: 4.12.01.2015
Taille: 7.86 Mb
Système d'exploitation: Windows 98, Windows 95
Windows 95/98 Sound Driver version 4.12.01.2015 for Yamaha DS-XG sound system.
Type de fichier: Driver
Version: 1.5.06.0
Taille: 5.66 Mb
Système d'exploitation: Windows NT

BULLETIN BOARD

Bulletin Board is a convenient place to pin things to visually organize in a fun and creative way. Simply drag-and-drop your favorite pictures, files, or notes to pin them on the Board. Easily accessible from your desktop - use it to create thumbnail shortcuts, reminders, to-do lists, etc., according to your personal style.

Toshiba Bulletin Board is like a customized mini homepage that keeps you on top of your busy life. Just drag, drop and pin your important pictures, files, notes, letters and links onto your board. No more searching endlessly through folders. It’s all right there in front of you. Then, just as easily “unpin” and remove them when the job’s done, or you want a different look.

From the Toshiba board, you can quickly access key utilities, programs and special offers like Toshiba Online back-up. Get alert messages for product updates and special offers. Or instantly enter our support center when you need help. Because your time is precious, it’s time you started using Toshiba Bulletin Board.

To open TOSHIBA Bulletin Board:

  1. Click the Start menu.
  2. Enter "Bulletin" into the search field.
  3. Click "Bulletin Board" in the search results.
  4. The TOSHIBA Board will open.
  5. Two screens will be available. One displaying computer and program information (shown above), the second is the screen you can pin tasks, files, etc... as described above.
  6. To learn more about Toshiba Bulletin Board, click the question mark icon in the upper Right of the screen.

CLICK HERE for additional information about Toshiba Bulletin Board.

Type de fichier: Applicazione
Version: 7.02.65a-01
Taille: 1.44 Mb
Système d'exploitation: Windows 98, Windows 95
Windows 95/98 Display Driver version 7.02.65a-01 for S3 Savage/MX display adapter.
Type de fichier: Driver
Version: 1.5.08.0
Taille: 1 Mb
Système d'exploitation: Windows NT

REEL TIME

Toshiba ReelTime™ is a graphical history/indexing tool that enables you to view recently accessed files in a fun and easy-to-use format. View and scroll through your history of opened or imported files via thumbnails in an intuitive user interface. Your ReelTime display can be customized to suit your user preferences.

Toshiba ReelTime™ replaces the old fashioned “hunt-and-click” method of finding your files with an visual timeline or “reel,” Now, instead of questions like, “Where is it?” you simply ask “When did I use it?” You’ll spend less time searching, more time doing and enjoying, and keep your day in high gear. Toshiba ReelTime™ shows a row of your most recent files as graphic previews at the bottom of your display, making it easy to see at a glance what’s there. Flick through your reel to find the file you need. Then, keep it handy by dragging and docking it nearby. A brush of your finger or mouse is all it takes. ReelTime simplifies searching by automatically tracking and indexing the documents and programs you open. It groups them and presents them as visual thumbnails so you can easily find what you’re looking for.

Toshiba ReelTime™ also lets you cut through the clutter by filtering out the files you don’t want, and honing in on the ones you do. Group your photos, files and clips by type or by program to look at last month’s book reports, queue up video clips for posting, or to prep for building another great photo album. For all the things you want to do, Toshiba ReelTime™ saves you serious time.

To open TOSHIBA Reel Time:

  1. Click the Start menu.
  2. Enter "Reel" into the search field.
  3. Click "Reel Time" in the search results.
  4. The TOSHIBA Reel Time will open. By default "Everything" is selected, showing all of your files in chronological order. You can then choose to view documents, photos, videos, as well as other items. 
  5. To learn more about TOSHIBA Reel Time, click the question mark icon in the lower Right corner of the screen.

CLICK HERE for additional information about TOSHIBA Reel Time.

Type de fichier: Driver
Version: 1.00.2518
Taille: 1.54 Mb
Système d'exploitation: Windows XP
Type de fichier: Driver
Version: 1.62.0.6C
Taille: 671.14 Kb
Système d'exploitation: Windows 95
Windows 95 Unimodem V Drivers version 4.10.1343.01-RC5 for Tecra 8000, Portege 7000.
Type de fichier: Driver
Version: 2.0USB1
Taille: 655 Kb
Système d'exploitation: Windows 98, Windows 95, Windows 2000, Windows NT
This driver exposes system information to DMI-enabled applications.
Type de fichier: Driver
Version: 1.62.0.6C
Taille: 1.02 Mb
Système d'exploitation: Windows 2000
This software is the foundation for the other Toshiba-provided Win2k Utilities, and must be installed first.
Type de fichier: Applicazione
Version: 1.0
Taille: 1.07 Mb
Système d'exploitation: Windows XP
This Utility will eliminate the "Wrong machine" messages when you try to restore the factory software image from the Config Builder CD or PIRAD CD/DVD. Click for more information about this issue.

Requires either a bootable diskette drive (FDD), or bootable CD-ROM (CD-RW, DVD-ROM/RW). If no FDD is available, requires access to CD authoring (burning) software and hardware.

Build 60303 fixes an issue where Satellite 5205-S705 units were programmed with the incorrect DMI model string.

Type de fichier: BIOS
Version: 3.1.1
Taille: 1.09 Kb
Système d'exploitation: Windows XP
Toshiba CMOS Setup program for portable computers.

This DOS program displays and allows you to set the CMOS/BIOS settings of your Toshiba portable computer. This program does not run in a DOS session under Windows. From Windows, you'll need to restart in MS-DOS mode in order to use this utility.

You can also access the BIOS/CMOS setup screen without having to use TSETUP by holding down the [Esc] key when you first power-on the system.

Type de fichier: Driver
Version: 1.62.0.3C
Taille: 3.6 Mb
Système d'exploitation: Windows 95
Type de fichier: Driver
Version: 2.00.0006
Taille: 3.6 Mb
Système d'exploitation: Windows 98
Type de fichier: Driver
Version: 2.3.0.8
Taille: 723.91 Kb
Système d'exploitation: Windows NT
Type de fichier: Driver
Version: 4.04
Taille: 1.35 Mb
Système d'exploitation: Windows 2000
Provides Toshiba-specific Win2k display (LCD) power management functionality. Requires Toshiba ACPI common modules (TVALD).

Version 1.0.0 contained code which controlled portions of the display adapter as well as the display panel. This version (1.1.0) controls only the display panel.

Type de fichier: Applicazione
Version: 1.00.04
Taille: 1.25 Mb
Système d'exploitation: Windows 2000
This software is the foundation for the other Toshiba-provided Win2k Utilities, and must be installed first.
Type de fichier: Driver
Version: 1.50
Taille: 1.35 Mb
Système d'exploitation: Windows 2000

Release Notes

  • After the update completes, the computer will automatically shut down or restart.
  • Power on the computer if it is off.
  • While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
  • Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
  • Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

  • Version 1.50 - 2010-05-22
    • Disabled a SMART-related message during POST.
    Version 1.30 - 2009-12-11
    • Updated the Computrace function to support DDR3 memory modules.
    Version 1.20 - 2009-10-30
    • Added support for a new second source BIOS ROM.
    Version 1.10 - 2009-10-20
    • Added a workaround for a Realtek WLAN driver issue.
    Version 1.00 - 2009-09-11
    • Initial production BIOS for these models.
Type de fichier: Driver
Version: 6.0.1.5904
Taille: 1.09 Mb
Système d'exploitation: Windows ME
Toshiba Hibernation Utility version 5.1
Type de fichier: Driver
Version: 2.01.11_O
Taille: 1.41 Mb
Système d'exploitation: Windows ME
Toshiba Power Saver Utility version 4.00.00
Type de fichier: Driver
Version: 1.1
Taille: 48.84 Kb
Système d'exploitation: Windows 2000
Toshiba Windows 2000 Infrared Port Driver version 2.21.
Type de fichier: Driver
Version: 1.2.26
Taille: 4.99 Mb
Système d'exploitation: Windows ME
Windows Me Sound Driver version 5.12.01.2229 for Yamaha DS-XG sound system.
Type de fichier: Driver
Version: 7.x5.303.117
Taille: 1.5 Mb
Système d'exploitation: Windows 2000
Windows Utilities provide the FnEsse and HWSetup applications.
Type de fichier: Driver
Version: 2.01.11_O
Taille: 2.07 Mb
Système d'exploitation: Windows 98
Toshiba Windows 98 Utilities version W984340USB3 for Satellite Pro 4260/4280.
Type de fichier: Driver
Version: 1.10
Taille: 1.91 Mb
Système d'exploitation: Windows 95

Change History

  • Version 1.10 - 2009-10-20
    • Added a workaround for a Realtek WLAN driver issue.
    Version 1.00 - 2009-09-11
    • Initial production BIOS for these models.

Non-OS

Type de fichier: BIOS
Version: 1.40
Taille: 672.11 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 1.60
Taille: 672.58 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 1.80
Taille: 682.22 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.00
Taille: 686.78 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.10
Taille: 688.07 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.20
Taille: 687.79 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.40
Taille: 689.3 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.50
Taille: 688.98 Kb
Système d'exploitation: Other
Type de fichier: BIOS
Version: 2.70
Taille: 690.67 Kb
Système d'exploitation: Other
Type de fichier: Applicazione
Version: 1.0 build 60303
Taille: 1.07 Mb
Système d'exploitation: Other
Type de fichier: BIOS
Taille: 1.09 Kb
Système d'exploitation: Other


Connexe

TOSHIBA SATELLITE PRO 4280ZDVD
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO 4280ZDVD (Other)

TOSHIBA SATELLITE PRO 4260DVD
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO 4260DVD (Other)

TOSHIBA SATELLITE PRO L450-EZ1522
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO L450-EZ1522 (Other)

TOSHIBA SATELLITE PRO 4300
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO 4300 (Other)

TOSHIBA SATELLITE PRO 410CDT
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO 410CDT (Other)

TOSHIBA SATELLITE PRO L550-EZ1703
Pilotes pour Portables, netbooks TOSHIBA SATELLITE PRO L550-EZ1703 (Other)


Demande de driver

ejemplo