DELL NETWORKING POWERCONNECT 6224F

Date: septembre 20th, 2013

Pour télécharger les drivers pour DELL NETWORKING POWERCONNECT 6224F pour Windows, Mac OS, Windows 8 (64), Windows 8 (32), Windows 7 (64), Windows 7 (32), Windows Vista (64), Windows Vista (32), Windows XP (64), Windows XP, Mac OS X 10.5 Leopard, Windows 2012, Windows 2008 (64), Windows 2008, Windows 2008 (32), Windows 2003 (64), Windows 2003, cliquez sur "Télécharger". Si vous avez besoin d'un drivers d'une autre version, envoyez une demande de driver. Si vous avez des questions sur ce driver, veuillez nous contacter via le formulaire de contact. Sur cette page, vous pouvez discuter notamment de l'installation, la désinstallation et la mise à jour du driver.

Modèle:
PowerConnect 6224F
Editeur:
Dell
Type de périphérique:
Réseau d'entreprise, serveurs / Networking
Licence:
Gratuit

Windows Mac OS

Windows

Type de fichier: Applicazione
Version: 4.4,A00
Taille: 83.61 Mb
Système d'exploitation: Windows 8 (64), Windows 8 (32), Windows 7 (64), Windows 7 (32), Windows Vista (64), Windows Vista (32), Windows XP (64), Windows XP, Windows 2012, Windows 2008 (64), Windows 2008 (32), Windows 2008, Windows 2003, Windows 2003 (64)
Dell Lasso 4.4
Lasso v4.4 is the latest Lasso version. It is a standalone collection utility that automates the collection of all pertinent hardware and software configuration details from the target Storage Area Network (SAN) attached Servers, Dell Storage Arrays, Fibre Channel, Ethernet and FCoE Switches, and Enclosures.
Lasso v4.4 is the latest Lasso version. It is a standalone collection utility that automates the collection of all pertinent hardware and software configuration details from the target Storage Area Network (SAN) attached Servers, Dell Storage Arrays, Fibre Channel, Ethernet and FCoE Switches, and Enclosures.
1. Support to collect, parse, and view SAN configuration report for Dell Networking W Series Mobility Controllers. 2. Support to parse and view SAN configuration report for Power Connect 5.1 Firmware.3. Support to parse and view SAN configuration report for Brocade 6520 FC switch. 4. Support to collect, parse, and view SAN configuration report for Equallogic 7.0 Firmware. The report includes Access Rules and Storage Containers (Per Pool).5. Support to collect, parse, and view SAN configuration report for VCenter. The report includes VCenter information, DVS information, Clusters, Host, Virtual Machines information, DataStores and License information.6. Support to collect, parse, and view SAN configuration report for Dell VRTX Chassis. 7. Support to collect, parse, and view SAN Configuration report for Force10 C-Series (C300), E-Series (E1200i, E600i and E300), S-Series (S25P, S55, S4810, S4820T and S6000), Z-Series (Z9000), and MXL models. 8. Support to collect data for SAN HQ devices and also support the same IP address in "Host" and "Management and Monitoring" pages. 9. Support to collect SAN HQ group archive files (.grpx) from windows hosts. 10. Support to collect, parse, and view SAN configuration report for PowerConnect 5524, 5548, 8132, 8132f, 8164, and 8164f switches. 11. Support to collect, parse, and view SAN configuration report for VMware ESX and ESXi host License information.12. Support to invoke the command line interface using Lasso.cmd.
Microsoft Windows Installer Package
Type de fichier: Applicazione
Version: 4.4.0.21,A16
Taille: 165.77 Kb
Système d'exploitation: Windows Vista (64), Windows Vista (32), Windows XP, Windows 2008 (64), Windows 2008 (32), Windows 2008, Windows 2003
Dell PowerConnect 3348
Dell previously released free versions of this application allowing unlimited devices to be discovered and managed. With 4.x versions, unless you purchase and install an additional license, OpenManage Network Manager 4.x will limit the number of devices you can manage to 10. You can purchase additional licenses by contacting your sales representative or go to www.dell.com/networking. If you have not installed an additional license or choose not to purchase additional licenses at this time, you can still upgrade to this version and retain/manage all of your previously discovered devices. However, you will not be able to discover any additional devices including newly supported devices unless you are below your installed license limit. Also, each time you remove a device from discovered devices, you will not be allowed to add the device back unless you are below the installed license limit.OpenManage Network Manager provides support for the following Dell Powerconnect devices: 5524, 5548, 5524P, 5548P, 7024, 7024P, 7024F, 7048, 7048P, 7048R, 7048R-RA, M8428-K, M8024-K, 62xx, 62xxP, 62xxF, 8024F, 8024, M8024, M6348, M6220, 54xx, 53xx, 35xx, 35xxP, 34xx, 34xxP, J-EX8208, J-EX8216, J-EX4200-24T, J-EX4200-48T, J-EX4200-24F, J-SRX100B, J-SRX100H, J-SRX210B, J-SRX210H, J-SRX210-P, J-SRX240B, J-SRX240H, J-SRX240-P, J-SRX100S, J-SRX100SU, W-620, W-650, W-651, W-3200, W-3400, W-3600, B-MLXe4, B-MLXe8, B-MLXe16, B-FCOE1024, B-FCX624, B-FCX624S, B-FCX648, B-FCX648S, B-TI24X, B-RX4, B-RX8, B-RX16, B-8000/8000e, and B-DCX4S.As always, it is recommended that you backup your OMNM database if you are upgrading. Refer to the User Guide that came with this application for backup procedures.
IMPORTANT: Network Manager can only be installed as an initial install or upgraded from version 4.3. This version of Network Manager adds support for several Powerconnect J-Series, B-Series, and W-Series devices. Other features in 4.x are: • A free license is included to manage up to 10 devices. You can continue to manage any number of devices when upgrading from previous versions containing previously discovered devices, but will be required to purchase an additional license to discover additional devices. If after an upgrade you have more devices discovered than you have a license for, you will only be able to remove the devices and not be allowed to add any device until you drop below the license limit (unless you purchase an additional license). Once the number of devices fall below the licensed amount, the license limit goes into effect.
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.

Mac OS

Type de fichier: Manuel
Version: OMNM 5.2 SP 1,A20
Taille: 2.52 Kb
Système d'exploitation: Mac OS X 10.5 Leopard
PowerConnect
The base version of OMNM that you download here will manage up to ten (10) Dell devices. To manage additional devices, you can purchase device license packs by contacting your sales representative, or go to www.dell.com/omnm . IMPORTANT:OMNM 5.2 SP 1 can be installed as an initial install or upgraded from version 5.1 or 5.2. If you upgrade from either OMNM version 5.1 or 5.2, all data and settings will be maintained. This can be done by contacting your sales representative or going to www.doradosoftware.com/dell/upgrade-info.html . There is no charge for updating your license key to the OMNM 5.2 format. Refer to the User Guide and Release Notes for additional information. As always, it is recommended that you backup your OMNM database if you are upgrading. Refer to the User Guide that came with this application for the backup procedure.If you are running OMNM 4.4, ***** we strongly recommend uninstalling OMNM 4.4 and installing OMNM 5.2 as an initial install *****. If you are running OMNM 4.4 and choose to upgrade, OMNM will change and migrate only a limited amount of data from to version 5.2. This results in some data and settings being changed or no longer accessible. Refer to the User Guide and Release Notes for additional information. If you choose to install OMNM 5.2 as an upgrade from OMNM 4.4, you can continue to manage previously discovered devices after reinstalling your license key. However, you will be required to update your OMNM 4.4 license to an OMNM 5.2 license to enable the new OMNM 5.2 features. If after an upgrade you have more than 10 devices discovered, you will only be able to remove devices and not be allowed to add any device until your OMNM 4.4 license has been converted to OMNM 5.2 license format. This can be done by contacting your sales representative or going to www.doradosoftware.com/dell/upgrade-info.html . Refer to the User Guide and Release Notes for additional information. There is no charge for updating your OMNM 4.4 license key to the OMNM 5.2 license format.Upgrades from versions prior to OMNM 4.4 are not supported. If you are running OMNM 4.3 or an earlier release, you should uninstall OMNM in order to install OMNM 5.2.
Fixes and Enhancements: Enhancments:This version of OMNM adds support for the Dell Force10 S4820T. A free license is included to manage up to 10 devices. Other features in OMNM are: - Easy-to-use and very customizable web based user interface - Traffic Flow Analysis - Helps maintain optimum performance configurations - Out of the box support for all Dell switches including W-Series controllers and wireless access points. - "Proscan" configuration audit - easily track down and correct configuration issues - Active Performance Monitors allow for proactive customization of performance monitoring.Fixes:> KPI Monitors do not correctly count ipOutDiscards for prior versions of DellOpenManage Network Manager. Calculations of ipTotalDiscards is accuratein this version. (19405)> The audit trail message Collecting network data now reads Collecting network data for Ethernet link discovery.(20967)
This file format contains plain text which can be viewed with a standard text editor.
PC6200v3.3.7.3a32/PC6200UpgradeSoftwareFromVersion 3.x.x.xProcedure.pdf
PC6200v3.3.7.3a32/PC6200UpgradeSoftwareFromVersion2.xProcedure.pdf
PC6200v3.3.7.3a32/PC6200v3.3.7.3-MIBs.zip
PC6200v3.3.7.3a32/PC6200v3.3.7.3.stk
PC6200v3.3.7.3a32/PC6224X_6248X-3_3_7_3-Release_Notes.pdf
PC6200v3.3.7.3a32/
Type de fichier: Firmware
Version: 3.3.7.3,A32
Taille: 10.09 Mb
Système d'exploitation: Mac OS X 10.5 Leopard
PowerConnect 6200 Series
This firmware release has fix for the below issue: Loss of switch management access with netPanic overflow messages "0xca93d30 (ip6MapLocalDataTask): panic: jobQueueStdPost: out of QJOBs!" after a few hours of switch uptime
This firmware release has fix for the below issue: Loss of switch management access with netPanic overflow messages "0xca93d30 (ip6MapLocalDataTask): panic: jobQueueStdPost: out of QJOBs!" after a few hours of switch uptime
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.


Connexe

DELL NETWORKING POWERCONNECT 5448
Pilotes pour Réseau d'entreprise, serveurs DELL NETWORKING POWERCONNECT 5448 (Mac OS X 10.5 Leopard)

DELL NETWORKING POWERCONNECT 7048
Pilotes pour Réseau d'entreprise, serveurs DELL NETWORKING POWERCONNECT 7048 (Other)

DELL NETWORKING POWERCONNECT M6348
Pilotes pour Réseau d'entreprise, serveurs DELL NETWORKING POWERCONNECT M6348 (Mac OS X 10.5 Leopard)

DELL NETWORKING POWERCONNECT 8024
Pilotes pour Réseau d'entreprise, serveurs DELL NETWORKING POWERCONNECT 8024 (Mac OS X 10.5 Leopard)

DELL NETWORKING POWERCONNECT 7024
Pilotes pour Réseau d'entreprise, serveurs DELL NETWORKING POWERCONNECT 7024 (Mac OS X 10.5 Leopard)

DELL NETWORKING POWERCONNECT M8024
Pilotes pour Réseau d'entreprise, serveurs DELL NETWORKING POWERCONNECT M8024 (Mac OS X 10.5 Leopard)


Demande de driver

ejemplo